Valor iLink L2 User Manual - page 2
Discountcarstereo.com
3. Video Connection
Using the yellow connector of A/V cable, connect the iLink A/V out terminal to the VIDEO in terminal of your
home or car system. Please refer to the instruction manual of your system to find the VIDEO IN terminal
4. Audio Connection
Connecting to Analog audio output (most commonly used)
Using the white and red connectors of A/V cable, connect the iLink A/V out terminal to the AUDIO IN of your
system. Please refer to the instruction manual of your system to find the AUDIO IN terminal
Connecting to Digital audio output (5.1 CH)
If your headunit has a digital audio input terminal (coaxial), you can enjoy 5.1 audio if you playback 5.1 ch audio
files. Using the digital audi cable (not included), connect digital audio output terminal to the digital audi input
terminal (coaxial terminal) of your system. Please refer to the instructions manual of your system
.
5. iPod installation and Removal
iPod Installation
Connect the 24-pin connector (smaller one) of iPod connection cable to the iLink. Connect the 30-pin connector
(bigger one with LED and remote sensor) iPod connection cable to the iPod. A clicking sound informs you when it
is properly inserted. Be sure to check the connector orientation when you connect the iPod. You can connect the
iPod to the iLink anytime regardless of power ON/OFF.
Removing the iPod
Before you remove iPod from the iLink, select the Eject icon on the main menu and wait until “OK to disconnect”
message appears on the monitor screen. You can then easily remove the iPod from iLink by pressing the
connector lock and pulling the connector out.
6. Home Installation
Power connection
AC power adapter supports 100V~240V AC input voltage with DC9V 1000mA output. To prevent damage to
the system, it is recommended to use only the iLink’s optional AC power adapter.
Video Connection
Using the yellow connector of A/V cable, connect the iLink A/V out terminal with VIDEO IN or COMPOSITE IN
terminal on the TV. Please refer to the instruction manual of your TV to find the VIDEO IN terminal.
Audio Connection
Connecting to Analog audio output (most commonly used)
Using the white and red connectors of A/V cable, connect the iLink A/V out terminal to the AUDIO IN of your TV.
Please refer to the instruction manual of your TV to find the AUDIO IN terminal
Connecting to Digital audio output (5.1 CH)
If your A/V receiver has a digital audio input terminal (coaxial), you can enjoy 5.1 audio if you playback 5.1 ch
audio files. Using the digital audi cable (not included), connect digital audio output terminal to the digital audi
input terminal (coaxial terminal) of you’re A/V receiver Please refer to the instructions manual of you’re A/V
receiver.