Valor ITS-710W Owner's Manual - page 14
Select FM/AM Band
Touch the button on the screen, or press the BAND button( )on the remote control to
change among the following bands: FM-1, FM-2, FM-3 and AM.
Auto Tuning
Press the button ( ) on remote control or touch the button on the screen to seek the
next available channel by increasing the tuning frequency. Press the button again to stop
searching.
Press the button ( ) on the remote control or touch the button on the screen to seek
the next available channel by decreasing the tuning frequency. Press the button again to stop
searching.
Manual Tuning
Press the button on the remote control or touch the button to increase the tuning
frequency one step at a time.
Press the button on the remote control or touch the button to decrease the tuning
frequency one step at a time.
Using Preset Stations
12 numbered preset buttons store and recall stations for each band. Front 6 stored stations (P1-
P6) for the current band appear on the screen, touch the channel directly to select.
You can touch the arrow buttons on the screen to see the other 6 stations.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an onscreen preset button (6) for three seconds. The preset number appears
at the top of the screen.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored station.
Auto Store (AS)
Press the AS/PS button on the panel or Press and hold the button on the screen to
automatically scan and store all stations in current band.
23
22
Tuner Operation
1. Current Source information, touch this area to return to MAIN menu
2. Current Radio Band Indicator
3. Current Preset Station playing Indicator
4. Stereo Broadcast Indicator
5. Radio Frequency Indicator
6. Preset Radio Stations: Touch to recall preset stations or touch and hold to store a station.
(total 12 stations a Band can be preset.)
7. System EQ setting
8. Loud Setting Indicator (See “Audio control menu” for instructions.)
9. Rear Zone Playing Mode
10.Volume Indicator.
11.Strong Local Signal Broadcasting Indicator: Touch to active Local/DX function
12.Current time
13.Bluetooth Indicator
14.
: Touch to change among the following bands: FM-1, FM-2, FM-3 and AM.
15.
: Touch to automatically scan and store stations in current radio band. You also can
press the AS/PS button on the front panel.
16.
: Touch to seek down.
17.
: Touch to seek up.
18.
: Touch to tune down once a step.
19.
: Touch to tune up once a step.
20.
: Touch to activate/deactivate Scan Mode
Switch to Radio Tuner source
Press the SRC button on the front panel or on the remote control to switch to the Tuner source.
You can also access the tuner mode from the MAIN menu directly.
Tuner TFT Display
1
2
6
7
15
3
4
5
17
16
18
13
14
19
20
12
8
9
10
11