3003172/02 owner guide we trust that these instructions give sufficient details to enable this appliance to be installed and maintained satisfactorily. However, if further information is required, our valor technical helpline will be pleased to help. Telephone 08706 061 065 (national call rates appl...
Customer care thank you for choosing valor. All valor gas fires are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years’ trouble-free service. Your owner guide aims to improve your understanding and appreciation of your valor gas ...
Safety do have the fire installed by a competent person. In the united kingdom, installation must be in accordance with the latest edition of the gas safety (installation & use) regulations. In the republic of ireland, installation must be in accordance with all national and local regulations in for...
Operating your fire the oxysafe flame sensing & flue blockage safety system. For your safety, this appliance is fitted with a flue blockage safety device which will shut down the appliance in the event of abnormal flue conditions. This device is not a substitute for an independently mounted carbon m...
Lighting the main burner once the pilot light is established, the main burner can be lit by depressing and turning the control knob anticlockwise to the “high” position. Selecting the heat setting in order to change from one setting to another depress the control knob slightly and turn the knob to t...
Cleaning to maintain the high performance and quality finish of your valor appliance, please follow these guidelines: before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool. The fire will retain heat for some time before cleaning can begin. If an...
Refitting ceramics both models 1. Fit the burner tray trim over the front rim of the burner tray. Push the trim fully down. See figure 2. Fitting coals to models supplied with a coal ceramic fuel effect. (for models supplied with a pebble ceramic fuel effect see section headed ‘fitting pebbles to mo...
2. Place the front base coal in the firebox with its bottom front locating over the front rim of the firebox. Pull the coal forward so that it locates immediately behind the front rim of the firebox. See figure 4. There are two types of loose coals. These are identified with the letter “a” or “b” on...
6. Place the remaining type “b” coal at the right side of the firebox between the front and rear base coals. The letter “b” should be upright. The coal should touch the right side of the firebox. See figure 8. 7. Place the remaining type “a” coal between the front and rear base coals. The letter “a”...
Install the 11 loose pebbles as follows. The underside of each pebble is marked with a letter ‘a’ to ‘k’ and an arrow. The pebbles should be positioned so that the arrows always point towards the back of the fireplace opening. When located into position the stem of each arrow should be at 90° to the...
6. Hold pebble ‘d’ upright with the arrow pointing to the top. Place pebble “d” on top of the base front pebble. It should rest against the moulded pebble to its right. (see figure 15). 7. Hold pebble ‘e’ upright with the arrow pointing to the top. Place pebble ‘e’ between the front and rear base pe...
10. Hold pebble ‘h’ upright with the arrow pointing to the top. Place pebble ‘h’ between the front and rear base pebbles. It should rest in between pebbles ‘c’ & ‘d’ and against the moulded pebble in the rear pebble base. (see figure 19). 11. Hold pebble ‘i’ upright with the arrow pointing to the to...
Maintenance regular maintenance in order to achieve and maintain high levels of personal safety and performance efficiency, it is essential that the opening at the back of the fire and the flue are kept clear of any form of obstruction. It is possible that deposits of mortar or soot could fall and a...
When fitting replacement parts, follow the instructions contained in this guide. It is important that only valor approved parts are used for maximum safety. In the united kingdom, for general advice about gas and your gas fire call our technical helpline 08706 061 065. In the republic of ireland cal...
