- DL manuals
- Valor
- Measuring Instruments
- TPMS GAUGE
- User Manual
Valor TPMS GAUGE User Manual
Summary of TPMS GAUGE
Page 1
Tpms gauge - user manual 1-800-568-9188 4320 harvester rd., floor 2 burlington, on, l7l 5s4, canada.
Page 2: Proprietary Information
User manual – tpms gauge 2 proprietary information please read this user manual carefully before using this product. This specification is proprietary property of valor. It shall not be duplicated, used, or disclosed in whole or in part for any purpose other than official valor business activities, ...
Page 3: Table of Contents
User manual – tpms gauge 3 table of contents user manual overview description of device ........................................... 4 device specifications .......................................... 5 physical device characteristics ........................... 7 device dimensions ......................
Page 4: User Manual Overview
User manual – tpms gauge 4 user manual overview description of device 1. There are 3 buttons for navigating the screens through an intuitive menu system. 2. Back-lighting can be controlled through the panel lamp dimmer input through the menu screen. A dead-fronted warning indicator is positioned abo...
Page 5: Device Specifications
User manual – tpms gauge 5 device specifications physical characteristics housing and bezel material: chrome or black polycarbonate abs plastic connector: single deutsch dt06, polarized and locking environmental characteristics temperature, humidity, shock, vibration, and salt spray: meets or exceed...
Page 6: Device Specifications
User manual – tpms gauge 6 device specifications electrical inputs battery/ignition: 9 to 32 volts input current: 500 ma backlighting: variable through pin-3 input with 12v or 24v pwm dimmer or menu setup screen. Data bus: sae j1939 (can) 250k electrical outputs switch to ground: one, 500 ma display...
Page 7
User manual – tpms gauge 7 physical device characteristics user manual overview back of device: front of device:.
Page 8: Device Dimensions
User manual – tpms gauge 8 device dimensions user manual overview .277 (7.04) 2.389 (60.68) 1.355 (34.42) 2.260 (57.40) 1.13 (28.70) .16 (4.06) 2.07 (52.58) dimensions measured in inches(mm) gauge dimensions: panel cut-out dimensions:.
Page 9
User manual – tpms gauge 9 device rear electrical connections user manual overview pin signal 1 battery/ignition 2 ground 3 backlight (optional analog input) 4 j1939+ 5 j1939- 6 output, switch to ground.
Page 10: Default Settings
User manual – tpms gauge 10 default settings the following settings will be the default for initial programming. ‣ default contrast set to 50%. ‣ default backlighting control set by pin 3. ‣ when manually backlighting control selected, default set to 50%. ‣ units set to english. ‣ c-com 2g source ad...
Page 11: Device Software Versions
User manual – tpms gauge 11 device software versions the following show the variations between the different software versions of each device. Due to the fact that each device operate at different data rates, they cannot be interchanged. 1700 device software baud rate 250 kb same alerts display as a...
Page 12: Device Software Versions
User manual – tpms gauge 12 device software versions the following show the variations between the different software versions of each device. Due to the fact that each device operate at different data rates, they cannot be interchanged. 1702 software device baud rate 500 kb same alerts display as a...
Page 13: Main Screens
User manual – tpms gauge 13 main screens left hold will start 2.5 second automatic rotation decrementing through tire position, then axle position. When on the lowest axel- tire position, it will then repeat from highest axle-tire position. Any button press will stop rotation. Right hold will start ...
Page 14
User manual – tpms gauge 14 1 123 ºf 123 psi axle 1 tire 1 axle 2 tire 1 axle n tire 1 axle 1 tire 2 axle 2 tire 2 axle n tire 2 axle 1 tire 3 axle 2 tire 3 axle n tire 3 axle 1 tire 4 axle 2 tire 4 axle n tire 4 2 123 ºf 123 psi n 123 ºf 123 psi 1 123 ºf 123 psi 2 123 ºf 123 psi n 123 ºf 123 psi 1 ...
Page 15: Setup And Info Screens
User manual – tpms gauge 15 setup and info screens user manual overview press center button (diagram continued on the next page.) 0 active warnings 1+ active warnings display next active warning right button press center button to return to active warnings intro screen active warnings intro active w...
Page 16: Setup And Info Screens
User manual – tpms gauge 16 setup and info screens user manual overview press center button (diagram continued on the next page.) display next axle right button press center button to return to baseline intro screen baseline intro baseline confirmation press left button press right button display ne...
Page 17: Setup And Info Screens
User manual – tpms gauge 17 press center button press center or right button center – keep previous selected unit right – save selected units left – rotate selections center – save selected setting. Exit right – increase contrast left – decrease contrast select units adjust contrast contrast units m...
Page 18: Setup And Info Screens
User manual – tpms gauge 18 press center button press center button right button press center – save selected setting. Exit right – increase intensity left – decrease intensity center – keep previous setting. Exit right – save selected setting. Exit left – rotate selections press any button to retur...
Page 19: 123 ºf
User manual – tpms gauge 19 additional main screen displays user manual overview 123 ºf 123 psi 1 axle 1 tire 1 has temperature warning. 1 123 ºf 123 psi ! Axle 1 tire 1 has a pressure or leak warning. 1 123 ºf 123 psi ! Metric units selected temperature warning pressure or leak warning 6 tires per ...
Page 20: 123 ºf
User manual – tpms gauge 20 123 ºf 123 psi 1 metric units selected 123 ºc 1234 kpa 1 tire comm ! 2 tires per axle pgn 65268 never received or lost reception for 100 seconds tire communication issue additional main screen displays user manual overview.
Page 21: Pop-Up Warnings
User manual – tpms gauge 21 pop-up warnings user manual overview pgn 65268 never received or lost reception for 100 seconds tire comm ! Spn 2587=011 or 100 amber led on for 011 red led on for 100 spn 2587=001 amber led on. 1 under pressure ! 1 over pressure ! Over pressure warning under pressure war...
Page 22: Pop-Up Warnings
User manual – tpms gauge 22 pop-up warnings user manual overview spn 1699=01 amber led on spn 1698=01 red led on temperature=401 o f, pressure=188 psi amber led on 1 over temp ! 1 leak ! Leak warning signal loss warning over temperature warning 1 signal loss !.
Page 23: Power-Up Screen
User manual – tpms gauge 23 power-up screen description ‣ performed when power is turned on. Back-light turns on. ‣ all-lcd segments screen displays for 1.5 seconds, then valor logo screen displays for 1.5 seconds. ‣ amber led is on for 1.5 seconds, and then red led is on for 1.5 seconds. ‣ after al...
Page 24: Tpms Initializing Screen
User manual – tpms gauge 24 tpms initializing screen description performed when power is turned on following power-up screen. When same tire location is received twice (assumes all tire locations have been transmitted in rotation) or same tire location is not received for 20 seconds, then exits to m...
Page 25: Main Screen
User manual – tpms gauge 25 main screen description ‣ displays tire location, tire temperature and tire pressure. Axle position number is displayed in center. ‣ tire position is filled within graphic based on position. ‣ tire axle and position display is learned and populated continually. ‣ if a tem...
Page 26: Main Screen
User manual – tpms gauge 26 main screen buttons ‣ left button hold will start forward 2.5 second automatic rotation decrementing tire position, then axel position. When on lowest axle-tire position, then repeat from highest axle-tire position. Any button press will stop automatic rotation. ‣ center ...
Page 27: Active Warnings Intro Screen
User manual – tpms gauge 27 active warnings intro screen description active warnings intro screen is an introductory screen for entering and reviewing active warnings. Buttons ‣ center button press will go to baseline confirmation intro screen. ‣ right button press will go to active warnings screen....
Page 28: Active Warnings Screen
User manual – tpms gauge 28 active warnings screen description active warnings screen displays a list of all active pop-up warnings that have previously been displayed. Display items ‣ “no warnings” is displayed if no pop-up warnings are active. ‣ if at least one pop-up warning is active, the pop-up...
Page 29: Baseline
User manual – tpms gauge 29 baseline confirmation intro screen please note: if you are using software version 1700, your device will not have access to the baseline confirmation screens. This function is not available for this particular firmware. Description baseline confirmation intro screen is an...
Page 30: Baseline Confirmation Screen
User manual – tpms gauge 30 baseline confirmation screen description baseline confirmation screen displays each tires baseline pressure value. Display items ‣ tire comm warning is displayed if pgn 65268 sa 51is never received or lost reception for 100 seconds. ‣ baseline pressure value is displayed ...
Page 31: Select Units Screen
User manual – tpms gauge 31 select units screen description ‣ units select screen allows the user to switch the displayed units between metric and english. Buttons ‣ left button press will change setting between metric and english. ‣ right button press will save selected setting, and go to contrast ...
Page 32: Contrast Adjust Screen
User manual – tpms gauge 32 contrast adjust screen description ‣ contrast adjust screen allows the user to adjust the lcd contrast setting. Display items ‣ contrast bar graph indication displays the current contrast setting. Range is 0-100% with 5% resolution. Left button will decrease contrast, rig...
Page 33: Back-Light Control Screen
User manual – tpms gauge 33 back-light control screen description ‣ back-light control screen allows the user to switch the back-lighting control between an external dimmer “set by pin 3” (not available) or set manually in the menu screen “set manually”. Display items ‣ “set manually” sets back-ligh...
Page 34: Back-Light Control Screen
User manual – tpms gauge 34 back-light control screen buttons ‣ left button press will change setting between “set by pin 3” (not available) and “set manually”. ‣ right button press will save selected setting. If “set manually” is selected, will go to brightness adjust screen. ‣ center button press ...
Page 35: Brightness Adjust Screen
User manual – tpms gauge 35 brightness adjust screen description ‣ back-light adjust screen allows the user to change the back-lighting intensity of the lcd. Display items ‣ intensity bar graph indication displays the current intensity setting. Range is 0-100% with 5% resolution. Left button will de...
Page 36: Sw:
User manual – tpms gauge 36 software version information screen description ‣ software version information screen display major and minor version level and software part number. Your software version may vary from the one shown in diagram. Display items ‣ “sw:” + major and minor version text is aria...
Page 37: Under
User manual – tpms gauge 37 under pressure pop-up warning description ‣ under pressure pop-up warning displays immediately ‣ amber led is on when tire is more than 12.5% below base line. ‣ red led is on when tire is more than 20% below base line. ‣ warning can be reviewed in the active warning scree...
Page 38: Over
User manual – tpms gauge 38 over pressure pop-up warning description ‣ over pressure pop-up warning displays immediately ‣ amber led is on when tire is 15% over base line pressure. ‣ red led is on when tire is 30% over base line ‣ warning can be reviewed in the active warning screen. Buttons ‣ any b...
Page 39: Pop-Up Warnings
User manual – tpms gauge 39 pop-up warnings over temperature pop-up warning description ‣ over temperature pop-up warning displays immediately and amber led is on, if tire is over 176 degrees f. ‣ warning can be reviewed in the active warning screen. Buttons ‣ any button pressed will return to previ...
Page 40: Pop-Up Warnings
User manual – tpms gauge 40 pop-up warnings leak pop-up warning description ‣ leak pop-up warning displays immediately and red led is on, if system detects pressure loss of 4.8 psi (or greater) over 16 seconds. ‣ warning can be reviewed in the active warning screen. Buttons ‣ any button pressed will...
Page 41: Pop-Up Warnings
User manual – tpms gauge 41 pop-up warnings tire communication pop-up warning description ‣ tire communication pop-up warning displays immediately and no led is on, if signal from the valor can transceiver is never received or lost reception for 100 seconds. ‣ warning can be reviewed in the active w...
Page 42: Pop-Up Warnings
User manual – tpms gauge 42 pop-up warnings signal loss pop-up warning description ‣ signal loss popup warning displays immediately and amber led is on, if temperature value is 401 o f and pressure value is 188 psi. ‣ warning can be reviewed in the active warning screen. Buttons ‣ any button press w...