1. DL manuals
  2. Valor
  3. Indoor Fireplace
  4. Ultimate 717
  5. Owner's Manual

Valor Ultimate 717 Owner's Manual

Manual is about: INSET LIVE FUEL EFFECT GAS FIRE

Summary of Ultimate 717

  • Page 1

    5108620/02 owner guide this guide is intended to help you care for your valor gas fire. Please read thoroughly before using and keep for future reference this guide to be left with the owner © valor heating this appliance is for use with natural gas (g20) when converted using conversion kit no. 0595...

  • Page 2: Plumbnation.Co.Uk

    The nation’s favourite for plumbing & heating supplies secure payments shop online with confidence free shipping on all orders over £100 to mainland uk finance available spread the cost with low interest rates price match always get the best deals available boilers radiators heating controls pipes &...

  • Page 3

    Safety first. Valor fires are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence. At the heart of every valor fire. All valor fires are manufactured to the highest standards of quality and excellence and are manufactured under a bs en iso 9001...

  • Page 4: List of Contents

    List of contents section page safety 4 appliance dimensions 6 gas consumption 6 operating your fire 7 lighting the pilot 7 lighting the main burner 8 lighting with a taper 8 selecting the heat setting 8 cleaning 9 burner 9 ceramic fuel effect and rear wall 9 metal parts 9 fuel bed refitting 10 maint...

  • Page 5: Safety

    Safety do have the fire installed by a competent person. In the united kingdom, installation must be in accordance with the latest edition of the gas safety (installation & use) regulations. In the republic of ireland, installation must be in accordance with all national and local regulations in for...

  • Page 6

    Do always use a fireguard complying with bs 8423 for the protection of young children, the elderly or infirm. Do wait three minutes before attempting to relight if the fire is switched off or the flames are extinguished for any reason.(your fire is fitted with a safety device that will automatically...

  • Page 7: Appliance Dimensions

    Appliance dimensions gas consumption model 717 has a maximum natural gas input of 6.0kw (gross) has a maximum natural gas output of 3.5kw has a minimum natural gas input of 2.3kw (gross) has a minimum natural gas output of 1.15kw model 717 when converted using kit number 0595221 has a maximum propan...

  • Page 8: Operating Your Fire

    Operating your fire the oxysafe flame sensing & flue blockage safety system. For your safety, this appliance is fitted with a flue blockage safety device which will shut down the appliance in the event of abnormal flue conditions. This device is not a substitute for an independently mounted carbon m...

  • Page 9

    Lighting the main burner ! Once the pilot light is established, the main burner can be lit by depressing and turning the control knob anticlockwise to the “high” position. Selecting the heat setting ! In order to change from one setting to another depress the control knob slightly and turn the knob ...

  • Page 10: Cleaning

    Cleaning to maintain the high performance and quality finish of your valor appliance, please follow these guidelines: ! Before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool. The fire will retain heat for some time before cleaning can begin. ! I...

  • Page 11: Fuel Bed Refitting

    Fuel bed refitting 1. Place the rear base coal in the firebox. It should rest on the ledges at the rear sides of the burner unit. When located gently move the rear base coal so that it is as far forward as possible. The amount of movement will be negligible (see figure 4). 2. Place the front base co...

  • Page 12

    There are two types of loose coals. These are identified with the letter “a” or “b” on the underside of the coal. There are three “a” coals and two “b” coals. 3. Place a type “a” coal between the front and rear base coals with the letter “a” upright and so that the coal is against the left side of t...

  • Page 13: Maintenance

    7. Place the remaining type “a” coal between the front and rear base coals. The letter “a” should be upside down with its rear face between the right and centre coals of the rear base coal. Angle the coal so that the gap between it and the type “b” coal to its right is appreciably larger than the ga...

  • Page 14: Useful Telephone Numbers

    Owner replaceable parts description part no ceramic rear wall 0579399 coal model front coal 5108541 rear base coal 5108542 pack of loose coals 0582839 ! When fitting replacement parts, follow the instructions contained in this guide. It is important that only valor approved parts are used for maximu...