Valor V60GTCLm Operating And Installation Instructions - page 9
3. Part : INSTALLATION AND PREPARATION FOR USE
8
•
•
•
•
3.3 Adjustment of feet
3.4 Gas connection
When choosing a place for your cooker, do not to place it near a refrigerator
and make sure there are no flammable or combustible materials in the
surrounding area that could catch fire with a cooker nearby, such as
curtains, oil, cloth etc.
Make sure there is at least a 2cm gap between the back cover of the cooker
and the wall to help the air circulate.
Any furniture near the cooker must be made of materials that are resistant
to heat up to 100°C.
Any kitchen furniture higher than the cooker top must be at least 10cm away
from the cooker's side.
The minimum height between the cooker top and any existing wall cupboards
and extractor fans with furniture fascias are shown above. Extractor fans inside
a kitchen cabinet must be at a minimum height of 650mm from the cooker top.
For exposed extractor fans, this height must not be less than 700mm.
Your oven stands on 4 adjustable feet. When the oven is placed where it will be
used, check if the oven is balanced. If it is not balanced, you can make the
adjustment by turning the feet clockwise if required. It is possible to raise the
appliance
a maximum of 30mm by the feet. If the feet are adjusted
appropriately, it is required not to move the appliance by dragging, it should be
moved by lifting it up.
The connection of the appliance should be performed in accordance with local
and international standards and
applicable regulations. You can find the
information related to appropriate gas types and appropriate gas injectors on
the technical data table. If the pressure of the gas is different than these
values stated
in the table or not stable in your area, then you must fix a
pressure regulator on the gas inlet. You must contact a qualified and
certified gas registered technician to make these changes for you.
The points that must be checked during flexible hose assembly
If the gas connection is made by a flexible hose that is fixed onto the gas inlet
of the cooker, it must be fitted with a pipe collar as well. Connect your
appliance with a short and durable hose that is as close as possible to the gas
source. The permitted maximum length of the hose is 1.5m.
The hose that supplies the appliance with gas must be changed once a year for
your security. The hose must be kept clear from areas that may heat up to
temperatures of more than 90°C. The hose must not be cracked, torn, bent or
folded. Keep the hose clear of sharp corners and objects that could move.
Before you assemble the connection, you must make sure the hose is not