Valor Valor Legend Ultra 837 AN Upgrade Instructions

Figure 2. Removal of lower front

casting.

Figure 1. Removal of ignition bar

knob.

Safety Upgrade Instructions

These instructions are for the

 Valor Legend Ultra

(Model 837 AN and 837 AP)

Important: Switch the appliance off, isolate the gas supply to the appliance and

ensure that the appliance is completely cool before continuing any further.

1. Removal of Fascia

Cast Iron Fascia

1.  Unscrew and remove the ignition bar knob

(See figure 1).

2.  Remove the lower front casting by lifting and

pulling forward (See figure 2).

3.  Remove two screws located behind the upper

decorative casting (See figure 3).

4.  Remove the Fascia by gentle pulling the top of

the fascia forward. Two retaining clips hold the

top of the fascia. Once clear of these the fascia

can be lifted clear of the lower bottom fascia

brackets (See figure 4)

3002783/01

Date: June 2002.

© Valor Heating