- DL manuals
- VALORIANI
- Oven
- BABY
- Installation, Use And Maintenance Handbook
VALORIANI BABY Installation, Use And Maintenance Handbook
Summary of BABY
Page 1
1 rev.Ar 2.0/it installation, use and maintenance handbook valoriani “ baby ” valoriani.
Page 2: Burning Surface
2 rev.Ar 2.0/it installation, use and maintenance handbook burning surface fire hazard crushing hazard overturing hazard warning during the utilization some surfaces of the fornogrill reach high temperatures. By using low quality coal , very dangerous sparkles , for the operator and the environment,...
Page 3
3 rev.Ar 2.0/it installation, use and maintenance handbook contents -1.0 introduction -2.0 description -3.0 installation safety warnings -4.0 handling -5.0 directions for use -6.0 baking times -7.0 cleaning and maintenance -8.0 dimensions.
Page 4
4 rev.Ar 2.0/it installation, use and maintenance handbook general warnings the present handbook is an integral and substantial part of the baby oven and must be kept available to the operators for any eventual consultation. Before carrying out any operation, read carefully the information contained...
Page 5: 1.0
5 rev.Ar 2.0/it installation, use and maintenance handbook 1.0 introduction this handbook contains all the information for the installation, use and maintenance of the baby oven. The original text of this publication , written in italian language , constitutes a unique reference for the resolution o...
Page 6: 2.0 Description
6 rev.Ar 2.0/it installation, use and maintenance handbook 2.0 description 2.1 introduction first of all we wish to thank you for selecting an item from valoriani. Our company has manufactured refractory items and prefabricated ovens for over 60 years in our premises located in reggello, close to fl...
Page 7: 3.0
7 rev.Ar 2.0/it installation, use and maintenance handbook 2.2 intended use the baby oven has been designed for the baking of pizza and products for oven in general. Of course it’s possible the baking of other foods complying with the oven cooking type. The baby oven can be used in gardens, terraces...
Page 8
8 rev.Ar 2.0/it installation, use and maintenance handbook 3.1.5 do not move the oven while there is still fuel inside, neither when it is still hot. 3.1.6 pay attention that the oven is not used by children as a toy, this negligence may cause accidents and the movement and climbing on the base or o...
Page 9: 4.0
9 rev.Ar 2.0/it installation, use and maintenance handbook 4.0 assembling and handling 4.1 assembling standard base in order to assemble the standard base, follow the scheme below by using the spanners supplied, position the legs inside the octagon and tight efficiently nuts and bolts..
Page 10
10 rev.Ar 2.0/it installation, use and maintenance handbook 4.2. Assembling luxury base in order to assemble the standard base, follow the scheme below by using the spanners supplied, position the legs inside the octagon and tight efficiently nuts and bolts..
Page 11: Attention
11 rev.Ar 2.0/it installation, use and maintenance handbook 4.3 assembling optional accessories 4.3.1 wheels to assemble wheels under the base, follow the scheme below by using the spanners supplied, tight efficiently nuts and bolts. 4.3.2 attention : the baby oven valoriani must be positioned and u...
Page 12
12 rev.Ar 2.0/it installation, use and maintenance handbook 4.3.3 shelf to assemble the shelf, remove the frontal screw of the steel floor, position the shelf and re-insert the screws, level the shelf with the steel floor and tight efficiently the screws. 4.3.4 kit shovels holder to assemble the sho...
Page 13
13 rev.Ar 2.0/it installation, use and maintenance handbook 4.4. Positioning the oven on the base to place the oven on the base: the oven can be lifted up and moved by four people after assembling the relevant lifting handles position the oven on its base, by embedding it the oven can also be lifted...
Page 14
14 rev.Ar 2.0/it installation, use and maintenance handbook 4.5 assembling gas burner 4.5.1 position the gas burner by inserting it from under the oven as shown in the image and block it in position wiht nuts supplied (see images below) 4.5.2 position the clamp and the gas burner panel with screws s...
Page 15
15 rev.Ar 2.0/it installation, use and maintenance handbook 4.5.3 position the copper connection of Ø 12 mm. Shape and insert it in the gas burner connection and in the control panel connection, tight the fixing joints (see image below) 4.5.4 position the copper connection of Ø 6 mm. Shape and inser...
Page 16
16 rev.Ar 2.0/it installation, use and maintenance handbook 4.5.5 position the connection tube of the thermocouple coming from the gas burner by inserting it in the connection of the control panel and tight the fixing joint, pay attention not to make too tight bends or knots (see images below) 4.5.6...
Page 17
17 rev.Ar 2.0/it installation, use and maintenance handbook 4.5.7 connect the tube of gas supply in the point indicated in the image below (the tub of gas supply is not supplied) the gas supply can happen through flexible tubes, the gas pressure from a gas bottle needs to be reduced with a pressure ...
Page 18: 5.0 Directions For Use
18 rev.Ar 2.0/it installation, use and maintenance handbook 5.0 directions for use 5.1 warnings 5.1.1 all the local regulations, included the ones referred to the national norms, european norms and international norms must be observed during the installation. 5.1.2 proceed with firing the oven only ...
Page 19
19 rev.Ar 2.0/it installation, use and maintenance handbook 5.2 firing of the wood fired oven when the oven is new, it contains a quantity of residual moisture, which during the drying must not turn into steam inside the handwork. Therefore it's fundamental to start very carefully with the first fir...
Page 20
20 rev.Ar 2.0/it installation, use and maintenance handbook 5.3 firing of the gas fired oven 5.3.1 gas burner regulation a) in order to fire the pilot flame, you must press the handle and turn it counter clockwise to the position n. 1 (star), keep the handle pressed (which allows the exit of the gas...
Page 21
21 rev.Ar 2.0/it installation, use and maintenance handbook c) press and turn counter clockwise the handle, and place it in position high flame n. 2 (see image below) d) extract the handle and regulate the height of the flame by acting on the screw (see images below). The right range is when the fla...
Page 22
22 rev.Ar 2.0/it installation, use and maintenance handbook e) press and turn counter clockwise the handle, and place it on low flame (see image) f) extract the handle and regulate the high of the flame by acting on the screw (see images below). The right range is when the low flame length is about ...
Page 23
23 rev.Ar 2.0/it installation, use and maintenance handbook g) insert again the handle. The low and high flame are now regulated, and with the handle it is possible to modify the heat requirements on the basis of what you are going to cook. H) to turn off the flame of the main gas burner and leaving...
Page 24
24 rev.Ar 2.0/it installation, use and maintenance handbook i) to turn completely off the main gas burner and the pilot flame, you need to place the handle on the black dot (see image below). J) the flame needs to be smooth and silent of yellow colour, but it does not need to colour too much the ove...
Page 25
25 rev.Ar 2.0/it installation, use and maintenance handbook 5.4 use of smoke detector the smoke detector can be used in two different positions, in order to reach two different outcomes. The internal position lowers the height of the oven’s mouth, thus allowing a smaller heat dispersion and a bigger...
Page 26: 6.0
26 rev.Ar 2.0/it installation, use and maintenance handbook the outer position lowers the height of the oven’s entrance, thus allowing a major combustion smokes extraction but as a consequence also a bigger heat dispersion and a smaller superior thermic reflection. 6.0 cooking times the cooking time...
Page 27: 8.0
27 rev.Ar 2.0/it installation, use and maintenance handbook standard maintenance refers just to the overall cleaning of the oven. For gas burner maintenance refer to qualified personnel. Each extraordinary maintenance operation must be carried out by qualified personnel. 8.0 dimensions problem cause...
Page 28
28 rev.Ar 2.0/it installation, use and maintenance handbook.
Page 29
29 rev.Ar 2.0/it installation, use and maintenance handbook.
Page 30
30 rev.Ar 2.0/it installation, use and maintenance handbook sede legale, amministrazione e stabilimento: via caselli alla fornace, 213 – 50066 reggello (firenze) tel.: +39/055-86.80.69 (r.A.) fax: +39/05586.95.992 web: www.Valoriani.It- e-mail: valoriani@valoriani.It.