Value Hobby P-51DMustang Instruction Manual - page 6
www.valuehobby.com/p-51d-mustang-arf.html
6
Parts list
M2*8mm (0.3in) self-tapping screws 4pcs----------for mounting the cowling
Engine Mount
M4*25mm (1.0in) socket head screws 4pcs
M4 washer 4pcs
Electrical motor box
M4*20mm (0.8in) socket head screws 4pcs
M4 locknut 4pcs
M4 washer 4pcs
M4*30mm (1.2in) socket head screws 4pcs---------for mounting wing panels
M4 washer 4pcs
M3*15mm 0.6in) socket head screws 4pcs--------for mounting hatch
M3 washer 4pcs
Tail wheel assembly 1 set
Tail wheel well 1set
Fuel tank tray
M3*10mm (0.4in) socket head screw 1pcs
380cc fuel tank
Tie cable 2pcs
Retract 1set
M3 socket head self-tapping screw 8pcs
Retract servo cover 2pcs
M2*6mm (0.2in) self-tapping screw 24pcs
Servo hatch 2 set
Servo mounting block 8pcs
M2*10mm (0.4in) self-tapping screw 16pcs
Aileron pushrod Φ1.8x80mm (3.1in) 2pcs
Flap pushrod Φ1.8x120mm (4.7in) 2pcs
Elevator pushrod Φ1.8x650mm (25.6in) 1pcs
Rudder pushrod Φ1.8x690mm (27.2in) 1pcs
Throttle pushrod Φ1.2x690mm (10.7in) 1pcs
U joiner Φ2.5x100mm (4.0in)
Retract pushrod Φ1.8x190mm (7.5in) 1pcs
Pushrod connector 9pcs
Ball link 2pcs
M2*10mm socket head screw 2pcs
M2 nut 2pcs
Control horn 6pcs
Hinges 22pcs