ValueHD VHD-J2100S User Manual - Fault Phenomenon And
ValueHD Corporation All rights reserved
8
socket to disconnect.
Clear the dust on the camera housing,
please use soft cloth or cotton paper
.
Clean the camera lens, please use dry
soft cloth to wipe, such as dirt serious when,
please use neutral detergent wipe gently. Don't
use strong or with corrosive cleaner, so as to
avoid the lens scratches, influence the image
effect;
●
Beyond
the
camera
work
intensity of illumination
Camera may be more than camera work
intensity of illumination, the image cannot
achieve the best effect.
The camera should avoid using
at the following specific situation
Camera should avoid shooting especially
bright objects, such as sunshine, lamplight, etc.
The camera don't work in lighting
conditions unstable environment, otherwise the
image will happen.
Don't can launch a large power of the
facilities around the use of radio waves, such
as television or radio transmitters, etc.
7
Fault phenomenon and
processing
Images
Display shows no image
1,Check whether the camera power
supply is connected and the voltage is normal,
whether the power light shine.
2,Check whether video platform, TV
cable connection is normal
3,Check for manual lens aperture and
open the aperture.
Sometimes there is no image
1,Check whether video platform, TV
cable connection is normal.
2,check whether the camera installation
safety, if there is a strong shock.
image blurring
1,Check whether the installation.
2,Check whether the lens focusing
accurately.
Control
Serial port can't control
1,The camera control parameters is set
up correctly.
2,Check whether control line connection
is good.
8
Standard Specification
Model
parameter
VHD-J2100S
200 万 1/3" CMOSAuto Focus
type HD Color Box Camera
(SDI)
Camera
Sensor Type
1/3" CMOS
Scanning mode
Progressive
Minimal
illumination
0.05 Lux @ (F1.2, AGC ON)