M a 2 6 0 instruction manual.
Vm ma260 stereo main amplifier 1 vm instruction manual thank you for having bought this van medevoort product. We wish you many happy listening hours. The manufacturer accepts no responsibility for any misunderstanding and/or misinterpretation or the consequences arising there from due to this instr...
Vm ma260 stereo main amplifier 2 before getting started in general when using your van medevoort product make sure that the following is observed: - the cooling air vents are not covered - the air can move freely around the product - the product is sited on a vibration-free surface - the product is ...
Vm ma260 stereo main amplifier 3 controls precautions connections maintenance and advice technical specifications Î 1 2 3 1. On / off power switch. Led indication control. Fully red when switched on, 50% red when in standby mode (selected with the van medevoort remote control). Above the led you wil...
Vm ma260 stereo main amplifier 4 controls precautions connections maintenance and advice technical specifications • only connect the amplifier to a (professionally installed) wall socket with earth or ground and the corresponding voltage setting, as indicated on the back of the amplifier. Any faulty...
Vm ma260 stereo main amplifier 5 controls precautions connections maintenance and advice technical specifications Î 12 Î 4 5 6 7 8 9 10 11 any faulty connection will invalidate the warranty 4. Inputs 1 - 4. Suitable for all digital sources. Routing to the internal dac. Input 1. Usb input to connect ...
Vm ma260 stereo main amplifier 6 controls precautions connections maintenance and advice technical specifications • on the backside of the amplifier you will find 2 rows of analog / line rca-cinch connectors. The upper row is for the left channel and the bottom row is for the right channel. • for yo...
Vm ma260 stereo main amplifier 7 controls precautions connections maintenance and advice technical specifications input 1 usb - 16bit / 48khz input 2 + 3 spdif rca – 24bit / 192khz input 3 + 4 spdif toslink optical - 24bit / 96khz input 5 + 6 analog line level - 50 kohms output tape analog source si...
