Van Medevoort PA471 Instruction Manual

Summary of PA471

  • Page 1

    P a 4 7 1 instruction manual.

  • Page 2

    Vm pa471 mono power amplifier 1 vm instruction manual thank you for having bought this van medevoort product. We wish you many happy listening hours. The manual it is essential to consult this manual before operating your van medevoort product. The numbers in the pictures correspond to the features ...

  • Page 3

    Vm pa471 mono power amplifier 2 before getting started in general when using your van medevoort product make sure that the following is observed: - the cooling air vents are not covered - the air can move freely around the product - the product is sited on a vibration-free surface - the product is n...

  • Page 4

    Vm pa471 mono power amplifier 3 controls precautions connections maintenance and advice technical specifications 1 1. On / off power switch. Led indication control. Fully red when switched on, 50% red when in standby mode. In case of malfunction the power led will flicker. Turn the amplifier off and...

  • Page 5

    Vm pa471 mono power amplifier 4 controls precautions connections maintenance and advice technical specifications only connect the amplifier to a (professionally installed) wall socket with earth or ground and the corresponding voltage setting, as indicated on the back of the amplifier. Any faulty co...

  • Page 6

    Vm pa471 mono power amplifier 5 controls precautions connections maintenance and advice technical specifications 2 3 4 5 problems caused by faulty connection will invalidate the warranty. 2. Ls. The loudspeaker output terminal. Upper one is red (+), bottom one is red (-). Both are red because this i...

  • Page 7

    Vm pa471 mono power amplifier 6 controls precautions connections maintenance and advice technical specifications for your convenience you will find a red sticker, indicating “phase”. The phase of your electricity system can be determined with a voltage seeker. The amplifier must only be cleaned with...

  • Page 8

    Vm pa471 mono power amplifier 7 controls precautions connections maintenance and advice technical specifications power amplifier power > 1 x 450 w distorsion 0,002 % 1 hz - 100 khz power bandwidth 1 hz - 100 khz damping factor 1200 - 1500 input level 1,5 v eff. / 450 w input impedance 100 kohms sign...