Summary of IP0120
Page 1
Ip phone user manual ip0120 (sip) ip0121 (h.323).
Page 2
Ip0120/ip0121 user manual 1 contents 1 overview .........................................................................................................4 1.1 i ntroduction ...............................................................................................4 1.2 k ey f eatures ..............
Page 3
Ip0120/ip0121 user manual 2 4 configurations on web .......................................................................33 4.1 n etwork c onfiguration on web .............................................................34 4.1.1 basic...................................................................
Page 4
Ip0120/ip0121 user manual 3 5.1 m aking c alls ............................................................................................43 5.2 r eceiving c alls .........................................................................................43 5.3 c heck call history ( incoming / outgoin...
Page 5
Ip0120/ip0121 user manual 4 1 overview 1.1 introduction vanaccess believes that the next generation networks based on voip technologies will change the way people communicate with each other and people will benefit a lot from the technologies. The usage of the technologies should be simple to most u...
Page 6
Ip0120/ip0121 user manual 5 1.2 key features • following h.323 version 4 standard ( ip0121 ) : o support fast start, tunneling and h.245 dtmf relay. • following rfc-3261 sip standard (ip0120) : o support password authentication using md5 digest and rfc-2833 for dtmf relay. • dynamic ip support (dhcp...
Page 7
Ip0120/ip0121 user manual 6 • support silence suppression, vad (voice activity detection), cng (comfort noise generation) : o silence suppression can save about half of the network bandwidth needed during normal voip conversation. • ping function supported : o ping other device in the internet from ...
Page 8
Ip0120/ip0121 user manual 7 1.3 hardware specification table 2. Hardware specification of ip0121 and ip0120 hardware spec spec\model ip0120 / ip0121 pc port 1xrj45 10/100 base-t ethernet, line auto-sensing/switching. 1xrj45 10/100 base-t ethernet, line auto-sensing/switching. Wan port (option)power ...
Page 9
Ip0120/ip0121 user manual 8 7. 6. 4. 5. 1. 2. 3. 2 basic installation 2.1 appearance introduction 2.1.1 key parts of the ip0120/ip0121 the key parts of the ip0120/ip0121 series ip phone are shown in figure 1, including the followings : 1. 2x16 lcd display 5. Handset 2. Keypad 6. Ethernet cable 3. In...
Page 10
Ip0120/ip0121 user manual 9 3. 2. 1. 4. 2.1.2 rear and back side panel of the ip0120/ip0121 the rear and back side panel illustration is shown in figure 2 and 3, main parts include: 1. Rj-45 ethernet port 2. Rj-45 ethernet port 3. Power adaptor jack 4. Jack of line to handset figure 2. Rear panel of...
Page 11
Ip0120/ip0121 user manual 10 figure 3. Back side panel of the ip phone.
Page 12
Ip0120/ip0121 user manual 11 2.1.3 keypad definition figure 3. Keypad illustration 1. Light the red light goes on-off when there is an incoming call. 2. Lcd display menu and all status shall be displayed for users. 3. “Í up” key when the ip phone is entered into the menu selection, this key is used ...
Page 13
Ip0120/ip0121 user manual 12 “Æ down” key when the ip phone is entered into the menu selection, this key is used to scroll down the menu items. And when the ip phone is editing some menu item’s contents, this key is used as “ right shift” to shift the cursor right a digit per each key press. 4. - in...
Page 14
Ip0120/ip0121 user manual 13 button light will turn on-off. User can press this button to try to register again to their service provider. 9. Message this is for future use of functions upgrade. 10. Menu / ok when the ip phone is at idle state, this key is used as “menu” key to bring out the menu se...
Page 15
Ip0120/ip0121 user manual 14 when a call is incoming and this ip phone is ringing, by pressing this “transfer” key and then another ip phone’s number can transfer the call immediately to another party without answering the call. 14. Redial / dial when the ip phone is off-hooked and dialed some numbe...
Page 16
Ip0120/ip0121 user manual 15 2.2 lcd menu list the following is the roadmap of the menu on your ip phone. Sip & h.323 share similar menu, different parts are written separately. view ¾ network value ¾ ip address ¾ network mask ¾ default route ¾ dns server ¾ ping ¾ quota ¾ restart ¾ image version ¾...
Page 17
Ip0120/ip0121 user manual 16 ¾ sip ¾ number ¾ password ¾ login id ¾ (yes / no) proxy on ¾ if yes: ¾ proxy address ¾ proxy port ¾ (yes / no) outbound proxy ¾ if yes: ¾ outbound proxy ip ¾ outbound proxy port ¾ (yes / no) rtplowbw ¾ forward mode ¾ (yes / no) immediate ¾ if yes: ¾ immediate number ¾ (y...
Page 18
Ip0120/ip0121 user manual 17 ¾ network ¾ mac address ¾ ntp server ¾ restart count ¾ rtp process ¾ (yes / no) bypass server ¾ (yes / no) jitter buffer ¾ (yes / no) auto upgrade ¾ phone advanced ¾ codec ¾ g.711u ¾ g.711a ¾ g.729 ¾ g.723 ¾ voice ¾ (yes / no) vad ¾ bg noise level ¾ volume ¾ ring volume ...
Page 19
Ip0120/ip0121 user manual 18 ¾ platform ¾ billing server ¾ login ¾ user name ¾ password ¾ confirm password ¾ statistics ¾ user statistics ¾ user statistic ¾ phone stastic ¾ phone statistics ¾ call missed ¾ call received ¾ call dialed ¾ additment ¾ international ¾ my country code ¾ area prefix code.
Page 20
Ip0120/ip0121 user manual 19 2.3 installation environment figure 4. Installation environment step 1： please take out your ip phone and its handset. Then connect your handset to ip phone by plugging the left jack of handset. If you use rj-45 broadband connection, please connect your network cable fro...
Page 21
Ip0120/ip0121 user manual 20 3 configuration from keypads the ip0120/ip0121 ip phone is designed to be installed and used very friendly and easily, so, almost all the configurations can be done through the keypads and lcd screen display on the phone set in a few minutes. In order to make a voip call...
Page 22
Ip0120/ip0121 user manual 21 3.1.2 pppoe method most of the broadband network environment provided now by isp is the adsl connection, under this environment, the ip phone can directly connect to the adsl modem by setting the pppoe account (user name and password) provided by adsl service provider, p...
Page 23
Ip0120/ip0121 user manual 22 3.2 registration to gk / proxy server after the network environment is set and connected to internet, you can register the ip phone to the h.323 gatekeeper or sip proxy server by the account from your voip vendor/operator. Please choose one of the following methods to re...
Page 24
Ip0120/ip0121 user manual 23 the “fullrrq” to “yes”. Notice: the ip0121 can pass the nat/router devices if the gatekeeper supporst this function. The ip phone will automatically detect if the gatekeeper support this and do the proper control to work under this nat environment. 3.2.2 registration to ...
Page 25
Ip0120/ip0121 user manual 24 if the ip phone does not register to any proxy server, it still can call to other ip phone by calling the ip address directly. E. (yes / no) outbound proxy – please set this item to yes if the registration needs to pass through the outbound proxy server. Notice: most of ...
Page 26
Ip0120/ip0121 user manual 25 3.3 registration / startup message when the network and registration configurations are set, please restart the ip phone, the lcd display on the ip phone will show one of the following message depends on whether the registration is ok or not. (a). When the ip phone is re...
Page 27
Ip0120/ip0121 user manual 26 calls. But the “proxy on” flag is “no”, i.E. The ip phone not need to register. In this case, can call the ip address of other ip phone directly. (c). When the ip phone is configured to use a gatekeeper or proxy server, but not yet registered successfully or failed, the ...
Page 28
Ip0120/ip0121 user manual 27 dhcpfail (number) date time means that the ip phone is configured to use dhcp to get ip address, but the dhcp procedure failed (can not find a dhcp server or the dhcp server rejected the ip assignment). The ip phone can not make any calls and the on-hook / off-hook funct...
Page 29
Ip0120/ip0121 user manual 28 (i). When the ip phone is enable the “immediate forward”, the lcd screen will display the following message : fwd(number) date time means that the ip0121 is working ok and ready for outgoing/incoming calls. But for any incoming call, it will be forwarded to the “immediat...
Page 30
Ip0120/ip0121 user manual 29 3.4 configurations under “view” item under the “view” menu item, there are many submenu items, these items are mainly for quick information about the current status of the ip phone and also provide some simple functions to check the network status of the ip phone, descri...
Page 31
Ip0120/ip0121 user manual 30 restart) action in that the “warm restart” will do the “un-registration” process to gatekeeper or proxy server if the ip phone is registered, and the “warm restart” will also disconnect the modem connection if modem is connected. 3.4.5 display current software version by...
Page 32
Ip0120/ip0121 user manual 31 3.5 “forward” configurations the ip0120/ip0121 series ip phone supports three different kinds of call forward functions, please select “configure”Æ”forward mode” for these three kinds of selection : 3.5.1 immediate forward under “forward mode” submenu, users are able to ...
Page 33
Ip0120/ip0121 user manual 32 3.6 software upgrade the ip0120/ip0121 series ip phone provide very simple software upgrade method, following the hot key definitions in section 6.1(table 3) to do the upgrade of different models. The upgrade is from the ftp server configured inside the ip phone, can be ...
Page 34
Ip0120/ip0121 user manual 33 4 configurations on web the ip0120/ip0121 series ip phone also provide the web interface for configuration, just key in the ip address of the ip phone using any web browser ( ie5 explorer or netscape ), you will see the following login window : username: root password: *...
Page 35
Ip0120/ip0121 user manual 34 4.1 network configuration on web by click on the “network” icon on the left banner, the following page will display to allow you to set all the network related configurations. 4.1.1 basic please see section 3.1 for the explanation of each field. 4.1.2 others 4.1.2.1 mac ...
Page 36
Ip0120/ip0121 user manual 35 to 8 for taiwan area 4.2 h.323 configuration on web by click on the “h.323” icon on the left banner, the following page will display to allow you to set all the h.323 related configurations. 4.2.1 h.323 parameters please see section 3.2 for the explanation of each field....
Page 37
Ip0120/ip0121 user manual 36 4.2.3.2 max media port : the maximum value of the range of the transmitted rtp packet’s port. 4.2.3.3 codec: the type of the codec of the transmitted rtp packets. In sip call process, the type of codec negotiated is determined by the called party..
Page 38
Ip0120/ip0121 user manual 37 4.3 sip configuration on web by click on the “sip” icon on the left banner, the following page will display to allow you to set all the sip related configurations. 4.3.1 sip parameters please see section 3.2 for the explanation of each field. 4.3.2 forward mode please se...
Page 39
Ip0120/ip0121 user manual 38 4.3.3.2 reg to: modify the “to:” field in the sip / sdp messages. Should left this empty unless for very specific system. 4.3.3.3 reg expire: modify the value “expires:” field in the sip/sdp messages. This will control the re-registration period. 4.3.3.4 min media port: ...
Page 40
Ip0120/ip0121 user manual 39 4.4 phone configuration on web by click on the “phone” icon on the left banner, the following page will display to allow you to set all the phone related configurations. 4.4.1 prefix for some specific voip system, the ip phone can call to pstn / mobile number and the cal...
Page 41
Ip0120/ip0121 user manual 40 4.4.2 voice 4.4.2.1 ring / handset / handfree volume – adjust the volume of receiving voice. 4.4.2.2 codectxgain – adjust the output voice volume. 4.4.2.3 ring type – adjust the ring type(ring pattern) of an incoming call. 4.4.2.4 rtplowbw – this ability is to decrease t...
Page 42
Ip0120/ip0121 user manual 41 4.4.3.2 bg noise level – this value controls the sensitivity of the vad detection..
Page 43
Ip0120/ip0121 user manual 42 4.5 system configuration on web by clicking on the “system” icon on the left banner, the following page will display to allow you to set all the system related configurations. In this page, you can do the software upgrade, change username/password of the web login accoun...
Page 44
Ip0120/ip0121 user manual 43 5 call functions 5.1 making calls to make a call, users can pick up the handset, dial the party’s number that wish to call, and end with “#” key to complete the dial. An alternative way to make a call is to press the light blue button (“speaker” key) at the down left cor...
Page 45
Ip0120/ip0121 user manual 44 5.4 auto redial users are able to call out with last dialed number (redial) by pressing “re/dial” key after off-hooked or in handfree mode. 5.5 call forward you can set the call forward functions through keypad or web configurations. Please refer to section 3.5 for the d...
Page 46
Ip0120/ip0121 user manual 45 a want b to transfer the call to c. B will transfer the call to c by pressing “hold” button first, b hear dial tone, b dial the c’s number, b talk to c, b hang up, then a can talk to c. The flowchart of the consultant transfer is: a call to b and talk to b a ask b to tra...
Page 47
Ip0120/ip0121 user manual 46 after the speed dial items m1-m10 are set, user can make speed dial call by directly pressing the m1-m10 key when the phone is off-hooked..
Page 48
Ip0120/ip0121 user manual 47 6 attachment 6.1 hot key definitions the hot key is a sequence of keys pressed when the ip phone is in idle state. The following table defines the hot key sequence and their corresponding functions. Hot key function #*101* upgrade mac #*102* test lcd #*103* test lcd and ...
Page 49
Ip0120/ip0121 user manual 48 6.2 h.323 interoperability list the followings are the list of some of the devices that have been tested to be interoperable with ip0121 series ip phone. - client/terminal microsoft netmeeting, version 3.01 openh323 phone, version 1.6.0 welltech, lanphone 101 sagitta ip ...
Page 50
Ip0120/ip0121 user manual 49 eztone gatekeeper tellink gatekeeper hivocal gatekeeper gcard gatekeeper - gateway d-link 4-port gateway vanguard managed solutions, vanguard (imtc 2002, from software vendor) audiocodes ltd., mp108 (imtc 2002, from software vendor) cisco systems inc., test bed#1 (imtc 2...
Page 51
Ip0120/ip0121 user manual 50 6.3 sip interoperability list the followings are the list of some of the devices that have been tested to be interoperable with ip0120 series ip phone. Client/terminal -scs-client v1.00 -sips 2.0.43.11 -sj-phone 1.10.187c -x-lite – fwd v2.0 -softphone – simems v0.90bata2...