- DL manuals
- Vanco
- Matrix Switcher
- 280564
- Technical Support
Vanco 280564 Technical Support
Summary of 280564
Page 1
Hdmi ® 4x4 4k2k compact matrix selector switch vanco part number: 280564 technical support www.Vanco1.Com • info@vanco1.Com • 800-626-6445.
Page 2: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 2 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3. To prevent risk of electrical shock or fire hazard, due to overheating, do not obst...
Page 3: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 3 features the vanco 280564 hdmi 4x4 compact matrix selector switch allows 4 hdmi sources to be distributed to up to 4 displays simultaneously. Have multiple sources displayed simultaneously on any display or have a single source duplicated on multiple displays, flexibili...
Page 4: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 4 package contents before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • (1) 280564 hdmi 4x4 matrix selector switch • (5) ir receiver (rx) • (4) ir blaster (tx) • (1) dc 12v, 2.5a power sup...
Page 5: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 5 panel descriptions 1. On/off: power on/off switch 2. Power: this red led illuminates when the device is powered 3. Ir eye: ir eye which receives ir signals from included remote for matrix switching 4. Output a: selects and displays which specific input is selected 5. Ou...
Page 6: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 6 edid the edid switch allows for edid learning or to pre-set an edid to encourage a “handshake” between the display and source. The edid learning function is only necessary whenever any display on the hdmi output port is not outputting audio and video properly. Because t...
Page 7: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 7 operation control - ir remote control output a: pressing the 1\2\3\4 buttons will select input source to hdmi output a, the led will indicate the corresponding input source. Output b: pressing the 1\2\3\4 buttons will select input source to hdmi output b, the led will i...
Page 8: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 8 operation control - software control through rs-232 1. Controlling the matrix unit 1. Select rs232 com or tcp mode 2. Select rs232 com port 3. Click to connect or disconnect pc and matrix 4. Select matrix ip 5. Connect to matrix ip 6. Search matrix ip 7. Configure matri...
Page 9: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 9 2. Edid 1. Set edid mode for selected input port or all input ports, click “set” button to complete action 2. Select edid setting desired 3. Select input port 4. Copy edid from output port to selected input port or all input ports, click “set” button to complete action....
Page 10: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 10 3. Matrix switching control via software 1. Displays which input is selected for respective output 2. Click to select input for respective output 3. Click to select previous or next input for respective output.
Page 11: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 11 4. Firmware update 1. Click to open firmware file (file extension is “.Fw”) 2. Displays the firmware file path 3. Displays progress of the software update 4. Click to update the matrix software 5. Displays messages of the software update 6. Clears the messages of the s...
Page 12: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 12 connect and operate 1. Connect up to 4 sources such as a blu-ray player, game console, a/v receiver, cable or satellite receiver, etc. To the hdmi inputs on the unit. 2. Connect the output hdmi ports, starting with output 1, to high-definition displays such as an hdtv ...
Page 13: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 13 ir blaster plug ir blaster into ir tx port of matrix unit (280564); place blaster in front of the ir eye of the corresponding source. Ir receiver plug ir receiver into ir rx port of matrix unit (280564); place receiver at or near corresponding display. Ir.
Page 14: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 14 notice 1. Vanco high speed hdmi cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of ir blaster and receiver may result in the failure of the unit. Please check carefully before plugging in the ir accessories into ...
Page 15: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 15 technical support in case of problems, please contact vanco technical support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.Com. When calling, please have the model number, serial number (affixed to the bottom of the unit)...
Page 16
Vanco® international 506 kingsland drive batavia, illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.Vanco1.Com.