Vanco 280567 Installation Manual

Manual is about: HDMI over Single Coax Cable Extender

Summary of 280567

  • Page 1

    Hdmi ® over single coax cable extender vanco part number: 280567 technical support www.Vanco1.Com • info@vanco1.Com • 800-626-6445.

  • Page 2: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 2 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3. To prevent risk of electrical shock or fire hazard, due to overheating, do not obst...

  • Page 3: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 3 features the vanco 280567 hdmi over single coax cable extender with ir extends high definition video and audio signals and ir, at a distance of up to 100m/328ft over a single rg6 coax cable. With only one cost effective coax cable, high definition sources with hdmi outp...

  • Page 4: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 4 package contents before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • (1) 280567 [tx & rx] • (1) ir blaster (tx) • (1) ir receiver (rx) • (2) dc 5v in line power supply • (1) rack-mounti...

  • Page 5: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 5 panel descriptions 1. Hdmi: connect the hdmi source with an hdmi cable. 2. Ir tx: connect included ir tx blaster and assign to corresponding source for source control 3. Coaxial: connect the coaxial cable to the hdmi receiver 4. Power led: this red led illuminates when ...

  • Page 6: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 6 connect and operate 1. Connect a source such as a blu-ray player, game console, a/v receiver, cable or satellite receiver, etc. To the hdmi input on the transmitting unit. 2. Connect a display such as an hdtv or hd projector to the hdmi output on the receiving unit. 3. ...

  • Page 7: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 7 ir blaster (tx) plug ir blaster into ir tx port of transmitter unit (280567-tx); place blaster in front of the ir eye of the source. Ir receiver (rx) plug ir receiver into ir rx port of receiver unit (280567-rx); place receiver at or near display. Ir.

  • Page 8: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 8 notice 1. Vanco hdmi and coax cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of ir blaster and receiver may result in the failure of the ir extenders. Please check carefully before plugging in the ir extender to ...

  • Page 9: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 9 trouble-shooting 1. Best results are usually achieved when the source and display resolutions are the same. If resolutions differ, the extenders will try to adjust the signal to match the resolution of the hdtv with the lowest resolution. This will result in a picture w...

  • Page 10: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 10 limited warranty with the exceptions noted in the next paragraph, vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase. Should thi...

  • Page 11: Www.Vanco1.Com

    Www.Vanco1.Com 800-626-6445 technical support in case of problems, please contact vanco technical support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.Com. When calling, please have the model number, serial number (affixed to the bottom of the unit) an...

  • Page 12

    Vanco® international 506 kingsland drive batavia, illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.Vanco1.Com.