Summary of 280591
Page 1
Hdmi ® over single cat5e/cat6 cable extender vanco part number: 280591 technical support www.Vanco1.Com • info@vanco1.Com • 800-626-6445.
Page 2: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 2 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3. To prevent risk of electrical shock or fire hazard, due to overheating, do not obst...
Page 3: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 3 features the vanco 280591 hdmi extender over single cat5e/6 with bi-directional ir extends high definition video and audio signals and ir, at a distance of up to 164ft/50m over a single cat5e/6 cable. Features edid management, which allows and encourages source and disp...
Page 4: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 4 package contents before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • (1) 280591 [tx & rx] • (1) ir blaster (tx) • (1) ir receiver (rx) • (2) dc 5v in line power supply • (1) user manual...
Page 5: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 5 panel descriptions 1. Power status: this led will illuminate when the unit is connected to power, letting you know that the unit is ready to send a signal. 2. Hdmi input: connect an hdmi cable from the source such as a bluray player or cable/sat receiver. 3. Dc 5v port:...
Page 6: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 6 edid the edid switch allows for edid learning or to pre-set an edid to encourage a “handshake” between the display and source. The edid dial helps out in forcing or encouraging a handshake between the source and display with the extender in between. If you are not recei...
Page 7: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 7 edid table continued: position edid description 9 copy edid from the transmitter hdmi loop out a copy edid from the receciver hdmi out b 1080p, 2ch audio c 1080p, 2ch audio d 1080p, 2ch audio e 1080p, 2ch audio f 1080p, 2ch audio eq adjustment the eq dial is to be adjus...
Page 8: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 8 connect and operate 1. Connect a source such as a blu-ray player, game console, a/v receiver, cable or satellite receiver, etc. To the hdmi input on the transmitting unit. 2. Connect a display such as an hdtv or hd projector to the hdmi output on the receiving unit. 3. ...
Page 9: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 9 ir blaster (tx) to control the source: plug ir blaster into ir tx port of transmitter unit (280591-tx); place blaster in front of the ir eye of the source. To control the display: plug ir blaster into ir tx port of receiver unit (280591-rx); place blaster in front of th...
Page 10: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 10 ir continued.
Page 11: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 11 to control the source: 1. Plug the ir blaster into the ir tx port on the transmitter 2. Plug the ir receiver into the ir rx port on the receiver ir receiver (rx) • to control the source: plug ir receiver into ir rx port of receiver unit (280591-rx); place receiver at o...
Page 12: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 12 to control the display: 1. Plug the ir receiver into the ir rx port on the transmitter 2. Plug the ir blaster into the ir tx port on the receiver.
Page 13: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 13 notice 1. Vanco hdmi and cat5e/6 cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of ir blaster and receiver may result in the failure of the ir extenders. Please check carefully before plugging in the ir extender...
Page 14: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 14 trouble-shooting best results are usually achieved when the source and display resolutions are the same. If resolutions differ, the extenders will try to adjust the signal to match the resolution of the hdtv with the lowest resolution. This will result in a picture wit...
Page 15: Www.Vanco1.Com
Www.Vanco1.Com 800-626-6445 15 technical support in case of problems, please contact vanco technical support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.Com. When calling, please have the model number, serial number (affixed to the bottom of the unit)...
Page 16
Vanco® international 506 kingsland drive batavia, illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.Vanco1.Com.