Hdmi ® 8 x 8 hdbaset matrix selector switch vanco part number 280759 www.Vanco1.Com • 888.769.4156 hdmi® matrix selector switch.
Www.Vanco1.Com 888.769.4156 2 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3. To prevent risk of electrical shock or fire hazard, due to overheating, do not obst...
Www.Vanco1.Com 888.769.4156 3 features vpw-280759 hdmi 8x8 hdbaset matrix switch has hdmi inputs and utp outputs to individual receivers. This matrix switch allows any of the eight hdmi inputs to be routed to any of the eight utp outputs simultaneously, without consideration as to whether the source...
Www.Vanco1.Com 888.769.4156 4 • matrix unit • remote. (one for main unit, others for ir calls back control from utp receiver). • 1 ir rx (ir receiver cable). • 8 ir tx (ir emitter cable). • 8 ir rx (broadband ir receiver cable). • usb to uart cable. • rs-232 to rs-485 converter. • 100~240v ac power ...
Www.Vanco1.Com 888.769.4156 5 back panel 1. Ir extension. 2. Dip for matrix setting. 3. Ir emitter, corresponding to the input port from 1 to 8 4. Rs-485 port. 5. Lan port. 6. Rs-232 port. 7. Power input. 8. Hdmi in. 9. Ir rx, works with vanco 280791 receiver. 10. Ethernet port, works with vanco 280...
Www.Vanco1.Com 888.769.4156 6 operation on the touch panel type a: step a.1: select an output port or ‘a’, and press “ok”, step a.2: select an input source, and press “ok”. Type b: step b.1: select a model, and press “ok”. Note: ‘c’ means clear, if you type the wrong number, press ‘c’. ‘a’ means all...
Www.Vanco1.Com 888.769.4156 7 setting menu - there are 5 sub menus here: edid/lc/ir/eq/rst the 280759 only uses the edid/ir/rst menu 1. Edid menu there are 6 modes provided. When selecting a different mode and pressing “ok”, the following warning box will pop up: the mode selected will be effective ...
Www.Vanco1.Com 888.769.4156 8 edid mode details: note: 1.When this mode is effective, press “cpy”, select the output port and input port. For example, if select output-3, input-8, if will copy the output-3’s edid to input-8. Note: 2.See as note1. If the video appears noise or interference when using...
Www.Vanco1.Com 888.769.4156 9 2. Ir menu iir call-back from remote locations to control the 8x8 hdmi matrix. You can use the matrix’s remote through the ir rx of the receiver to change the input channel for the utp out of 8x8 matrix, just changing this utp output. This function can be set on or off:...
Www.Vanco1.Com 888.769.4156 10 note: red dot indicates that the corresponding rj45 output port is in single output mode. Details please see the attached cd-rom about rj45 output mode switch instructions. Press “ms”- view the current status of matrix press “m1” - view the pre-existing state of matrix...
Www.Vanco1.Com 888.769.4156 11 control via ir remote note: if the ir remote does not work, please press thee ”system code switch key”, but please do not put the remote against the matrix unit. Control via rs232 1. The interface of the 8x8 matrix control.
Www.Vanco1.Com 888.769.4156 12 2. The message window 2.1 receive window the “receive window” will show the message received from matrix. When you click the control buttons) or send control command to the 8x8 matrix, it will send out the message about “operation results” as below: 2.2 status button c...
Www.Vanco1.Com 888.769.4156 13 2.4 setting button click this button to enter setting menu, 8x8 matrix and only use switch/ir back/edid setting/copy edid setting. 2.5 set ip button click this button to set ip address for nettle..
Www.Vanco1.Com 888.769.4156 14 2.6 ir set button click this button to set ir code for remote control. The device will enter ire set mode. You can edit your ire code in this mode. Step: 1. Read the ire code first by pressing “read code” button. 2. Select the code with cursor which you want to change....
Www.Vanco1.Com 888.769.4156 15 3.1 connect state. Connect state shows the com open or not. If it is open, the state is green. Otherwise, the state is red. 3.2 com select. Select which com you will use. Connect button. The word on this button will change when the connection state changes. If the word...
Www.Vanco1.Com 888.769.4156 16 outport5 >“49” 1“40” 2“41” 3“42” 4“43” 5“44” 6“45” 7“46” 8“47” outport6 > “59” 1 “50” 2 “51” 3“52” 4 “53” 5“54” 6“55” 7“56” 8“57” outport7 > “69” 1 “60” 2 “61” 3“62” 4 “63” 5“64” 6“65” 7“66” 8“67” outport8 > “79” 1 “70” 2 “71” 3 “72” 4 “73” 5“74” 6“75” 7“76” 8“77” when...
Www.Vanco1.Com 888.769.4156 17 lan control note: use the direct utp cable to connect with pc, or use cross cable to connect to the ethernet switcher a.When netctl run on pc at the first time, it will create a file ‘netctl.Txt’. This file is for device information’s backup. These information include ...
Www.Vanco1.Com 888.769.4156 18 the right area is for device controlling. Click these buttons to control the device. It is the same as using the remote controller. The left area shows which input ports are being chosen by the output ports. C. When ‘assign ip’ is displayed, it means that the device ha...
Www.Vanco1.Com 888.769.4156 19 click ok after assign the new ip and to return to the previous dialog. Click search and read device. The device can be displayed correctly. Attention: here assign ip is different from set ip in comctl. Set ip in comctl is save the ip address in flash, when the mx0808 p...
Www.Vanco1.Com 888.769.4156 20 specifications operating temperature range ..................................... -5 to +35°c (-41 to +95 °f) operating humidity range .......................................... 5 to 90 % rh (no condensation) input video signal .............................................
Www.Vanco1.Com 888.769.4156 21 hdbaset™ receiver - part number 280791 the vanco 280791 hdmi receiver uses hd base t technology to transport a hdmi signal from the vanco 280799 hdmi 16x16 matrix switch and from the vanco 280759 hdmi 8x8 matrix switch. This allows the hdmi signal to be transported a m...
Www.Vanco1.Com 888.769.4156 22 1. The 280791 receiver works in conjunction with a hdmi extender transmitter or matrix switch employing hd base t technology. 2. Connect a single cat 5e or cat 6 cable assembly from the utp output of a extender transmitter or matrix switch to the utp input of the 28079...
Www.Vanco1.Com 888.769.4156 23 7. A second stage of verifying the content of the eeprom follows, also with a progress percentage report note: for rs-232 control signal transmission, just connect two rs-232 cables to both rs-232 ports of extender transmitter or matrix switch and the receiver, they wo...
Www.Vanco1.Com 888.769.4156 24 ir hex codes - 280759 output 1: left: 0000 006f 0000 0022 0151 00a7 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 0015 0015 003f 0015 003f 0...
Www.Vanco1.Com 888.769.4156 25 output 3: left: 0000 006f 0000 0022 0151 00a7 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 001...
Www.Vanco1.Com 888.769.4156 26 output 5: left: 0000 006f 0000 0022 0151 00a7 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 001...
Www.Vanco1.Com 888.769.4156 27 output 7: left: 0000 006f 0000 0022 0151 00a7 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 001...
Www.Vanco1.Com 888.769.4156 28 the connection between 280759 matrix and remote controller with rs-232 modem cable. Pins definition of modem cable 280759 remote controller pin definition pin definition 1 nc 1 nc 2 tx 2 rx 3 rx 3 tx 4 nc 4 nc 5 gnd 5 gnd 6 nc 6 nc 7 nc 7 nc 8 nc 8 nc 9 nc 9 nc * rs-23...
Www.Vanco1.Com 888.769.4156 29 output 3 cir 20 output 3 select input1 cir 21 output 3 select input2 cir 22 output 3 select input3 cir 23 output 3 select input4 cir 24 output 3 select input5 cir 25 output 3 select input6 cir 26 output 3 select input7 cir 27 output 3 select input8 cir 28 output 3 sele...
Www.Vanco1.Com 888.769.4156 30 liability statement every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibi...
Www.Vanco1.Com 888.769.4156 31 technical support in case of problems, please contact vanco technical support by dialing 1-800-626-6445 or 1-888-769-4156. You can also email technical support issues to info@vanco1.Com when calling, please have the model number, serial number (affixed to the bottom of...
Vanco ® international 506 kingsland drive batavia, illinois 60510 call: 888.769.4156 fax: 630.879.9189 visit: www.Vanco1.Com.
