Vanco EVEX2006 Manual

Manual is about: HDMI Extender over Single Category 5e/6 Cable with POE

Summary of EVEX2006

  • Page 1

    Vanco part number evex2006 hdmi® extender over single category 5e/6 cable with poe www.Vanco1.Com • 800.626.6445 hdmi® extender over single cat5e/cat6 cable.

  • Page 2: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 2 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3. To prevent risk of electrical shock or fire hazard, due to overheating do not obstr...

  • Page 3: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 3 introduction the evolution by vanco evex2006 hdmi extender over single cat5e/6 with bi-directional ir, auto edid/eq, and poe extends high definition video and audio signals, ir, and power at a distance of up to 164ft/50m over a single cat5e/6 cable. Power over ethernet ...

  • Page 4: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 4 specifications technical specs hdmi compliance ...................................................... Hdmi deep color 30/36/48 bit color depth, full 3d hdcp compliance ...................................................... Yes video bandwidth ..............................

  • Page 5: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 5 1. Hdmi in - connects to a hdmi source with a hdmi male-male cable 2. Ir blaster - infrared 3.5mm socket for plugging in the extension cable of ir blaster 3. Ir receiver - infrared 3.5mm socket for plugging in the extension cable of ir receiver 4. 12 v dc - connect to 1...

  • Page 6: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 6 connection diagram connect and operate 1. Connect a source such as a blu-ray player, game console, a/v receiver, cable or satellite receiver, etc. To the hdmi input on the transmitting unit. 2. Connect a display such as an hdtv or hd projector to the hdmi output on the ...

  • Page 7: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 7 ir ir pass-through the bi-directional ir system allows you to control the source that is connected to the extender unit, from the display; or the display from the source, not simultaneously. There are two important things to note when setting up the ir system: 1. The ir...

  • Page 8: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 8 ir receiver (rx) • to control the source: plug ir receiver into ir rx port of receiver unit (evex2006-rx); place receiver at or near display. • to control the display: plug ir receiver into ir rx port of transmitter unit (evex2006-tx); place receiver in position where i...

  • Page 9: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 9 notice 1. Vanco hdmi and cat5e/6 cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of ir blaster and receiver may result in the failure of the ir extenders. Please check carefully before plugging in the ir extender ...

  • Page 10: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 10 trouble-shooting 1. Best results are usually achieved when the source and display resolutions are the same. If resolutions differ, the extenders will try to adjust the signal to match the resolution of the hdtv with the lowest resolution. This will result in a picture ...

  • Page 11: Www.Vanco1.Com

    Www.Vanco1.Com 800.626.6445 11 limited warranty with the exceptions noted in the next paragraph, vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase. Should thi...

  • Page 12

    Vanco ® international 506 kingsland drive batavia, illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.Vanco1.Com.