Vanco part number evsw1041 hdmi® 4x1 4k2k selector switch www.Vanco1.Com • 800.626.6445 hdmi® 4x1 4k2k selector switch.
Www.Vanco1.Com 800.626.6445 2 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3. To prevent risk of electrical shock or fire hazard, due to overheating do not obstr...
The evolution by vanco hdmi 4x1 switcher (evsw1041) allows 4 hdmi sources to be distributed to 1 display, with the ability of controlling each source connected and input switching from the display remotely via ir. Have multiple sources switched to a single display, flexibility by creating additional...
Www.Vanco1.Com 800.626.6445 4 package contents before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • (1) evsw1041 hdmi 4x1 4k2k selector switch • (1) ir receiver (rx) • (4) ir blaster (tx) • (1) dc 5v, 1a power supply...
Www.Vanco1.Com 800.626.6445 5 panel descriptions 1. On/off: power on/off switch. 2. Power led: illuminates when the device is powered on 3. In 1/in 2/in 3/in 4 led: illuminates to indicate which input is selected for output 4. Out led: illuminates when a display is connected 5. 2.0, 5.1, 7.1 led: il...
Www.Vanco1.Com 800.626.6445 6 operation control - ir remote control 1. Input selection: select input desired 2. Audio edid: select audio format desired, the panel led will indicate the selected edid status: 3. No function, reserved for future updates. 2.0ch: the switcher will modify the hdmi audio e...
Www.Vanco1.Com 800.626.6445 7 connect and operate 1. Connect up to 4 sources such as a blu-ray player, game console, a/v receiver, cable or satellite receiver, etc. To the hdmi inputs on the unit. 2. Connect an hdmi display to the output hdmi port, using a high-definition display such as an hdtv or ...
Www.Vanco1.Com 800.626.6445 8 ir blaster plug ir blaster into ir tx port of switcher unit (evsw1041); place blaster in front of the ir eye of the corresponding source(s). Ir receiver plug ir receiver into ir rx port of switcher unit (evsw1041); place receiver at or near corresponding display. Ir.
Www.Vanco1.Com 800.626.6445 9 notice 1. Vanco high speed hdmi cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of ir blaster and receiver may result in the failure of the unit. Please check carefully before plugging in the ir accessories into t...
Www.Vanco1.Com 800.626.6445 10 limited warranty with the exceptions noted in the next paragraph, vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase. Should thi...
Www.Vanco1.Com 800.626.6445 11 technical support in case of problems, please contact vanco technical support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.Com. When calling, please have the model number, serial number (affixed to the bottom of the unit)...
Vanco ® international 506 kingsland drive batavia, illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.Vanco1.Com.
