4k 4x1hdmi® switch with hdr and arc vanco part number: hdmisw41 technical support www.Vanco1.Com • techsupport@vanco1.Com • 800-626-6445.
Www.Vanco1.Com 800-626-6445 2 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3. To prevent risk of electrical shock or fire hazard, due to overheating, do not obst...
Www.Vanco1.Com 800-626-6445 3 features the vanco hdmi 4x1 switcher (hdmisw41) allows 4 hdmi sources to be distributed to 1 display, with full 4k resolution and hdr support. Allows multiple sources to be switched on a single display by creating additional hdmi inputs. The hdmisw41 is capable of up to...
Www.Vanco1.Com 800-626-6445 4 package contents before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • hdmisw41 4x1 hdmi switcher • 5v/1a usb power adapter • 5v usb to dc power supply cable • ir receiver • 3.5mm stereo ...
Www.Vanco1.Com 800-626-6445 5 panel descriptions 1. In 1-4 led: illuminates to display which source is selected 2. Auto/manual switching selection: pressing this button activates “smart switching” where the unit will auto switch, or activates manual source switching to activate either mode, press an...
Www.Vanco1.Com 800-626-6445 6 ir remote 1. Arc button: press to activate or deactivate arc function 2. Edid auto audio: pressing will utilize the display’s audio edid 3. Edid 2.1ch audio: pressing will utilize a 2.1ch stereo edid 4. Edid 5.1ch: pressing will utilize a 5.1ch stereo edid 5. Edid 7.1ch...
Www.Vanco1.Com 800-626-6445 7 ir source switching the hdmisw41 allows for manual or auto source switching, in manual mode, the front panel or included ir remote gives the ability to switch sources. In auto mode, the switcher will: 1. Automatically switch to any source input that is turned on 2. Auto...
Www.Vanco1.Com 800-626-6445 8 ir receiver to control the switch via the ir remote: plug ir receiver into ir in port of the switch. Point the ir remote at the ir receiver and send ir signals to for source switching. The ir receiver also gives the ability to conceal the hdmisw41 while still able to co...
Www.Vanco1.Com 800-626-6445 9 connect and operate 1. Connect sources such as a blu-ray player, game console, a/v receiver, cable or satellite receiver, etc. On the unit with hdmi cable(s). Insert and extract cables carefully with the power switched off. Connecting and disconnecting while the unit is...
Www.Vanco1.Com 800-626-6445 10 trouble-shooting 1. Best results are usually achieved when the source and display resolutions are the same. If resolutions differ, the extenders will try to adjust the signal to match the resolution of the hdtv with the lowest resolution. This will result in a picture ...
Www.Vanco1.Com 800-626-6445 11 limited warranty with the exceptions noted in the next paragraph, vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase. Should thi...
Vanco® international 506 kingsland drive batavia, illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.Vanco1.Com.
