Vandersteen Audio TREO Operation Manual

Summary of TREO

  • Page 1

    1 congratulations on your purchase of the vandersteen model treo loud- speaker. With proper care your new speaker system it will provide many years of trouble free, high quality musical enjoyment. We recommend that you read this entire manual prior to connecting or us- ing your model treo loudspeake...

  • Page 2: Connections

    2 connections t rue b i -w ire c onnections as part of the upgrades an improvements that elevate the performance of the treo they are outfitted with a four termi- nal barrier strip. This may require different cable termina- tions and connection methods. Spades or ring terminals are recommended. Plea...

  • Page 3

    3 the performance of the model treo is com- promised by a mono-wire connection. For op- timum performance you should bi-wire the speakers. E nhanced m ono- w ire c onnection mono-wiring should only be used with the treo as a tem- porary connection method. The speakers should be bi-wired as soon as p...

  • Page 4

    4 with the separate inputs for the midrange/tweeter and woofer on the treo’s, you may be tempted to bi-amplify the speakers using a powerful amplifier or an amplifier known for superb bass performance on the woofer input and a smaller amplifier or an amplifier renowned for middle and high frequency ...

  • Page 5

    5 216 divided by 3 is 72 (all to the nearest inch) 216 divided by 5 is 43 216 divided by 7 is 31 216 divided by 9 is 24 216 divided by 11 is 20 216 divided by 13 is 17 (and so on; eventually the lines pile on top of each other or the speaker runs into the wall.) the results are the distances in inch...

  • Page 6

    6 by overlaying the width and length graphs, we can see the intersection points of the lines. These points represent where the centers of the speakers should be placed to mini- mize nodes and anti-nodes. (14 x 12 = 168) and divide the result by odd numbers. 168 divided by 3 is 56 (all to the nearest...

  • Page 7

    7 if your listening position is close to the wall behind you, mount some sound absorbent material, such as a hanging tapestry, directly behind your head. As with the material for the side walls, experiment with a folded natu- ral-fiber blanket to verify the results before you acquire or mount the ma...

  • Page 8

    8 v andersteen a udio 8 i nstalling t he c ones & l istening h eight a djustments the quatro is supported by two cones, one in each front corner and one spike in the rear center. The cones and spike thread directly into the bottom of the speaker and provide stability and proper coupling to the floor...

  • Page 9

    9 h elpful s et- u p h ints a. To try the speakers on different walls, set your equip- ment in the middle of the room so the speaker cables can reach each position. B. When you change the placement of the speakers, listen to several different pieces of music before judging the results. C. If you set...

  • Page 10

    10 s peaker c are the appearance and performance of the model 2ce signa- ture ii can be enhanced by observing a few precautions and performing some simple maintenance. The input jacks on the model 2ce signature ii and the banana plugs should be cleaned periodically with alcohol or a solution made sp...

  • Page 11

    11 f or f uture r eference speaker serial numbers: purchase date: 5 year warranty applied for: and received: dealer name: dealer address: dealer phone: dealer contact: s pecifications acoustic coupler: 10” with critically damped long-fiber cone and heavy duty 1.5”, four-layer voice coil with venti- ...

  • Page 12

    12 model treo operation manual © copyright 2012 vandersteen audio, inc. L imited o ne year warranty vandersteen audio loudspeakers are warranted to the original purchaser to be free from defects in materials or workmanship, subject to the following conditions, for one (1) year from the date of purch...