VanillaIP Yealink W52P User Manual - Conference Call
7 |
P a g e
Conference Call
You can use the handset to ceatea a local conference with other parties. The hadnset
supports up to 3 parties in a conference call. You can create a conference between an
active call and a held call on the handset.
To set up a local conference call
1. Place a call to the first party
2. Press options soft key, and select conference
3. Do one of the following
Enter the number of the second party or select the handset you want to add to the
conference.
4. Press the Conf. soft key to dial out.
5. Press the Directory soft key, and select the desired contact.
6. Press the Call soft key.
If both the office number and the mobile number of the contact are stored, select
the desired number and press the OK soft key to dial out.
7. When the second party answers the call, you can consult with him or her
before adding to the conference.
8. Press the Conf. soft key again to join all parties in the conference.
To join two calls in a conference:
1. Place two calls on the handset.
2. Select the desired call and make sure the call is active.
3. Press the Options soft key, and select Conference.
Two calls are joined in the conference
To drop the conference call, press the End soft key