Vanner IQ12-2600 Owner's Manual

Manual is about: IQ Series

Summary of IQ12-2600

  • Page 1

    Vanner power group vanner power group iq series iq series iq series owners manual - 1 -.

  • Page 2

    Vanner power group vanner power group iq series iq series - 2 - iq series owners manual.

  • Page 3

    Vanner power group vanner power group iq series iq series iq series owners manual - 3 - table of contents 1 introduction.......................................................................................................................................... 5 1.1 m odel l isting ......................

  • Page 4

    Vanner power group vanner power group iq series iq series - 4 - iq series owners manual 5 theory of operation....................................................................................................................... 29 5.1 b attery c harger o peration ......................................

  • Page 5: 1 Introduction

    Vanner power group vanner power group iq series iq series iq series owners manual - 5 - 1 introduction thank you for purchasing a vanner power group iq series inverter or inverter/charger. We are confident that you will be satisfied with its performance and its many features. With proper installatio...

  • Page 6: Specifications

    Vanner power group vanner power group iq series iq series - 6 - iq series owners manual 1.2 specifications figure 1 specifications model number specifications iq12-2600 iq24-2600 iq12-3600 iq24-3600 iqc12-2600 iqc24-2600 iqc12-3600 iqc24-3600 ac output power continuous 2600 watts 2600 watts 3600 wat...

  • Page 7

    Vanner power group vanner power group iq series iq series iq series owners manual - 7 - 1.3 standard features 1.3.1 standard features furnished on all models in the iq series 1. 120 volt ac 60 hz quasi-sine wave output 2. Output short circuit / overload protection through electronic sensing 3. Outpu...

  • Page 8

    Vanner power group vanner power group iq series iq series - 8 - iq series owners manual 1.4 accessories part number name description d07869 remote operating panel remote on/off switch and indicator light display panel with 25ft modular cord. D07905 universal remote adapter screw terminal phone jack ...

  • Page 9

    Vanner power group vanner power group iq series iq series iq series owners manual - 9 - the load demand feature can be turned off by setting selector switch 2 to the off position. This will cause the inverter to remain fully on, producing 120 volts ac, whenever the inverter switch is on and regardle...

  • Page 10

    Vanner power group vanner power group iq series iq series - 10 - iq series owners manual warning risk of electrical shock. Use only the ground fault circuit interrupter (gfci) receptacle(s) or circuit breaker(s) specified in the installation and operating instructions supplied with this inverter. Ot...

  • Page 11

    Vanner power group vanner power group iq series iq series iq series owners manual - 11 - 1.9 precautions when working with batteries 1. Always have someone within range of your voice to come to your aid when you work near a lead-acid battery. 2. Have access to plenty of fresh water and soap nearby i...

  • Page 12

    Vanner power group vanner power group iq series iq series - 12 - iq series owners manual 2 component identification and description of operation numbered paragraphs in this section correspond with figure 1 – inverter illustration figure 2 iq series illustration.

  • Page 13

    Vanner power group vanner power group iq series iq series iq series owners manual - 13 - 2.1 (1) inverter indicator light all models light action description green light is off inverter circuit is off solid green inverter is on (producing ac power) fast blinking light inverter is in load demand mode...

  • Page 14

    Vanner power group vanner power group iq series iq series - 14 - iq series owners manual if both input ac1 and ac2 have power then power on ac2 will pass through. No power is drawn from the battery. The battery does not need to be connected for the power on ac2 to pass through,. On (run): the switch...

  • Page 15

    Vanner power group vanner power group iq series iq series iq series owners manual - 15 - 2.6 (6) bulk charge indicator light iqc models the light is present on all models but is functional only on iqc models. (see ‘battery charger theory of operation’ for charger performance details.) light action d...

  • Page 16

    Vanner power group vanner power group iq series iq series - 16 - iq series owners manual 2.11 (11) ac output receptacle all models gfci convenience receptacle, 120vac 1800 watt maximum output, protected by 15 amp circuit breaker cb2. (the gfci is a 20 amp t-slot receptacle but is protected by a 15 a...

  • Page 17

    Vanner power group vanner power group iq series iq series iq series owners manual - 17 - 2.16 (16) battery temperature compensation control jack j1 (jack j1 is present on all models but is functional on iqc models only.) iqc models jack j1 is a 4 wire modular jack for use with optional battery tempe...

  • Page 18

    Vanner power group vanner power group iq series iq series - 18 - iq series owners manual 2.18 (18) programming control switches located on the top right corner of the control circuit board is a 10 position dip switch containing the 10 individually numbered slide-type programming switches in one hous...

  • Page 19

    Vanner power group vanner power group iq series iq series iq series owners manual - 19 - vanner has designed the ac terminal block to accommodate spade or ring wire terminals and wire size up to 10 gauge. Refer to local codes for correct ac wire size appropriate for your inverter system and loads. G...

  • Page 20

    Vanner power group vanner power group iq series iq series - 20 - iq series owners manual ac2 optional ac input circuit used only for passthrough. Input power supplied to ac2 will pass through onlywhile input power is supplied to ac1. When input power is supplied to both ac1 and ac2 then ac1 is used ...

  • Page 21

    Vanner power group vanner power group iq series iq series iq series owners manual - 21 - 2.22 (22) mounting brackets all models the iq series utilizes detachable mounting brackets which offer a variety of mounting configurations. Warning: do not remove the plastic mounting feet. All units requires 3...

  • Page 22

    Vanner power group vanner power group iq series iq series - 22 - iq series owners manual 3 installation 3.1 unpacking the inverter inspect the shipping container and equipment for loose or damaged parts. If any damage is found, immediately notify the freight carrier. 3.2 inverter installation consid...

  • Page 23

    Vanner power group vanner power group iq series iq series iq series owners manual - 23 - the dc wiring enclosure is located on the top right side of the inverter system to permit connection of the two cables from the battery. Cable clamps are provided to secure the cables after they are terminated i...

  • Page 24

    Vanner power group vanner power group iq series iq series - 24 - iq series owners manual 3.4 dc wiring installation procedure steps 1. Turn the inverter off and disconnect power to the wiring harness. Make sure power to the inverter is disconnected. Verify that the inverter is turned off (the on-off...

  • Page 25

    Vanner power group vanner power group iq series iq series iq series owners manual - 25 - 5. Verify installation. Verify all connections are tight and secure for maximum safety and performance. 3.6 remote monitor and control panel installation unpacking the remote monitor/control panel inspect the sh...

  • Page 26

    Vanner power group vanner power group iq series iq series - 26 - iq series owners manual 4 system start-up and testing procedures warning: these procedures are to be performed only by a qualified installer. After the iq series inverter has been properly mounted with sufficient ventilation, dc cables...

  • Page 27

    Vanner power group vanner power group iq series iq series iq series owners manual - 27 - • the ac output test light should be on, indicating the presence of shore power and correct operation of the ac transfer switch. 13. For iqc models - disconnect the ac shore power input. The ac output test light...

  • Page 28

    Vanner power group vanner power group iq series iq series - 28 - iq series owners manual when the battery charge level is low, the battery low led turns on and will stay on until the battery voltage has dropped to the battery low shutdown stage the inverter shuts off and the led begins to blink. The...

  • Page 29

    Vanner power group vanner power group iq series iq series iq series owners manual - 29 - 5 theory of operation 5.1 battery charger operation the iq series' battery charger incorporates an automatic, three-stage charger. This design enables the unit to automatically charge batteries, maintaining the ...

  • Page 30

    Vanner power group vanner power group iq series iq series - 30 - iq series owners manual figure 5 battery charging graph 5.2 automatic power transfer switch theory of operation the function of the automatic transfer switch is to automatically accept ac input power from shore or generator, and use th...

  • Page 31

    Vanner power group vanner power group iq series iq series iq series owners manual - 31 - power becomes available. There is no 5 second time delay if the inverter is in the ‘load demand mode’ when input power becomes available. Switch 6 on the programming switch allows the user to select either 90 ac...

  • Page 32

    Vanner power group vanner power group iq series iq series - 32 - iq series owners manual 5.3 automatic power management (apm) theory of operation automatic power management (apm) feature when the iqc is connected to shore power and operating large ac loads it is possible that the ac loads combined w...

  • Page 33

    Vanner power group vanner power group iq series iq series iq series owners manual - 33 - 6 preventive maintenance there are no user serviceable components inside these inverters. For service refer to the vanner power group or other qualified service personnel. 6.1 maintenance items for continued rel...

  • Page 34

    Vanner power group vanner power group iq series iq series - 34 - iq series owners manual symptom battery low lamp illuminates when ac load is applied. Solution check battery connections. Check battery condition. Recharge battery if voltage is less than 10.5 vdc. Check the charging system for proper ...

  • Page 35

    Vanner power group vanner power group iq series iq series iq series owners manual - 35 - 6.3 gfci test record for maximum protection against electrical shock hazard, operate the test switch on the ground fault circuit interrupter at least once a month. Enter year jan feb mar apr may june july aug se...

  • Page 36

    Vanner power group vanner power group iq series iq series - 36 - iq series owners manual 7 appendices 7.1 inverter overview an inverter converts dc electrical power into ac power. This power can be used to operate various ac-driven appliances. The most common battery systems are 12 or 24 volt. Some ...

  • Page 37

    Vanner power group vanner power group iq series iq series iq series owners manual - 37 - desire to operate a rechargeable battery device on the inverter you should first power it up and closely observe it for a period of time to ensure that it does not run too hot. 7.3 battery types and ratings the ...

  • Page 38

    Vanner power group vanner power group iq series iq series - 38 - iq series owners manual material from its plates faster) if it is deeply discharged regularly, if it is left in a discharged state for extended periods of time, or if it is repeatedly overcharged. 7.4 inverter sizing power output is an...

  • Page 39

    Vanner power group vanner power group iq series iq series iq series owners manual - 39 - the basic information required to properly size your vehicle alternator and inverter battery, as well as give some examples of ac power distribution systems which are commonly used. Keep in mind that if informat...

  • Page 40

    Vanner power group vanner power group iq series iq series - 40 - iq series owners manual 2. Calculate the watt-hours required for each appliance by multiplying the power requirement by the operating time of that appliance. 3. Calculate the total watt-hours needed by adding together the watt-hours of...

  • Page 41

    Vanner power group vanner power group iq series iq series iq series owners manual - 41 - parallel connected batteries are batteries of the same voltage and rating which are connected positive to positive and negative to negative. They form a battery bank that has the same voltage as each individual ...

  • Page 42

    Vanner power group vanner power group iq series iq series - 42 - iq series owners manual 8 north americanlimited warranty vanner inc. Doing business as the vanner power group, referred to herein as vanner, warrants that this product is free from defects in materials and workmanship for a period of o...

  • Page 43

    Vanner power group vanner power group iq series iq series iq series owners manual - 43 -.

  • Page 44

    Vanner power group vanner power group iq series iq series - 44 - iq series owners manual.