Vantage Hearth VAEBLIR10FV User Manual
IR Bullet Camera
User Manual
Features
Caution
Accessories list
1
2
3
4
5
Sunshield housing
Screws
Camera
Mounting bracket
Manual
Items
Quantity
1 PC
1 bag
1 PC
1 PC
1 copy
No.
Installation
Structure
Sunshield housing
Camera
Mounting bracket Video/Power
Ⅰ
Ⅱ
Ⅲ
●
1/3" SONY CCD sensor
●
Latest DSP controls for BLC, white balance, and gain control.
●
resolution of 420 TVL
Horizontal
●
Built-in Fixed Lens, f=3.6mm.
Integrated efficient IR LED that allows for high resolution and full motion
●
video capture even in darkness. IR lighting distance 10m.
●
Built-in Photo-sensor for automatic operation of IR LED array.
●
Elegance in design for both mechanical and camera elements.
●
Aluminum sealed enclosure, waterproof.
●
Do not disassemble or modify the camera to avoid possible fire, electric
shock or other hazard. Please refer repairs or service to a qualified
service technician.
●
Take care when installing the camera. Avoid scratching the front glass window.
●
Avoid Shock, Vibration. Do not install the camera on an unstable surface. It
can be damaged by improper use or storage.
●
Never point the camera towards direct sunlight or other sources of bright
light in order to avoid a dimmer image due to too much backlighting.
●
Use the came ra within the published temp erature, humidity, and electrical
ranges.
●
Provide ample slack in the video and power cables once the camera is
installed in its final position.
●
Request for service by a qualified technician if the camera malfunctions or
generates excessive amounts of heat.
Unpack the camera carefully and make sure that all accessories are included for
the installation.
1 Mount the camera bracket to the wall or other stable surface using the supplied
screws.
2 Mount the camera as indicated in the drawing.
3 Adjust the cameras orientation by moving the bracket handle as shown.
4 Power the camera from a source of 12VDC power.
5. With the camera powered, connect first the camera's video output to a local
monitor to adjust for the perfect viewing angle, secure the camera, then
disconnect the service monitor and connect the camera to the video coax
feeding the CCTV monitor.
Video/
BNC Female
12VDC
.
.
VAEBLIR10FV
Ver 1.0