○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 1 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ digital surround processor / amplifier owner’s manual dpa-s50
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 2 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ fcc notice - this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rule. These limits are designed to provide...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 3 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ safety precautions 14. Power-cord protection - power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying pa...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 4 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ • 3 x 100w center and surround channel power amplifiers • 5.1 channel dolby digital (ac-3) decoder • pro logic, mpeg, 2 and 4 channel stereo processing in the digital domain • 3 cente...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 5 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ table of contents introduction rear panel connections system connections front panel controls speaker placement surround modes operating your stereo system with the dpa-s50 basic setup ...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 6 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ congratulations on your purchase of the vantas dpa-s50 digital surround processor/amplifier, a combination dolby digital decoder and amplifier. Integrated into any stereo system the d...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 7 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 1. Digital in the dpa-s50 provides one optical and two coaxial input jacks for up to three separate digital sources such as dvd/cd, laserdisc and tv (hdtv). The inputs have been marked ...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 8 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ 5. Tape rec the tape rec jacks on the dpa-s50 are used to record sources connected to the dpa-s50 and your stereo receiver/preamp. Connect tape rec in to your stereo receiver/preamp’s...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 9 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ system connections as a precaution, before making any connections, make sure the stereo amp and the dpa-s50 are turned off (no power) to prevent damage to any amplifiers or loudspeakers...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 10 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ connecting a dpa-s50 into a stereo system the following diagram is the most common hook-up configuration for the dpa-s50. It converts a stereo system into a dolby digital system. The...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 11 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ quick facts: although the main (l,r)-audio line out can be connected to any audio input on the stereo receiver/preamp, connnecting to the tape play input jacks is recommended if you us...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 12 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ using a powered center speaker if you are using a self-powered speaker or separate amp for the center channel, you do not need to use the dpa-s50’s built-in amplifiers to drive it. H...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 13 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ connecting a cassette deck since the basic hook-up requires the use of the stereo receiver/preamp’s tape play in jacks, another set of jacks has been supplied on the dpa-s50 for connec...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 14 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ 1. Connect the dpa-s50’s main (l, r)-audio line out jacks to the main left and right audio line in jacks on the receiver/integrated amp. 2. Connect the dpa-s50’s surround (l, r)-audi...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 15 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ installing digital components components in your system equipped with a digital output jack can be connected directly to one of the dpa-s50’s digital in jacks. Only one digital connect...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 16 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ 1. Power the power button turns the unit on and off. While in the “on” position, the dpa-s50 will always stay in a low power standby mode until it detects a signal at the inputs, whe...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 17 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ quick facts dolby digital soundtracks that are not specified for dynamic range compression will not be effected by the std and min settings. 4. 2 2 2 2 2 digital dyn range pressing thi...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 18 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ 6. Input source pressing this button repeatedly scrolls through the input sources for manual selection of the analog (icon “a” displayed) or digital (icon“d” displayed) inputs. The o...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 19 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ideal reproduction of 5.1 digital soundtracks requires five loudspeakers (main-left, center, main-right, surround-left and surround-right) plus a subwoofer. To ensure the optimum surro...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 20 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ the dpa-s50 employs a dolby digital (ac-3) decoder, providing playback for the latest generation of multi-channel digital audio sources. Dolby digital provides five, full range chann...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 21 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ operating your stereo system with the dpa-s50 when all the connections are made between your existing stereo system and the dpa-s50, you are ready to operate your new dolby digital sur...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 22 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ there are five set-up procedures and you cycle through them by depressing the setup button (at the bottom of the diamond shaped configuration on the right side of the dpa-s50). The f...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 23 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ when the setup button selects center and surround delay, the display panel will read “delay” and “ms”. 1. Use the speaker button to select either the center “ “ or surround “ ” speaker...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 24 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ the advanced setup procedures are accessed by pressing the setup button once (“ ” appears in display panel), followed by pressing the “+” and “-” buttons together. Each press of the ...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 25 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ advanced setup phase setting if your stereo amp flips the phase between its input and the speaker output, the audio line out signals can be inverted to compensate for this condition. T...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 26 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ problem possible cause remedy no power • the ac cord is disconnected • connect cord securely. (display does not illuminate on power up) • poor connections at ac wall outlet or the • ...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 27 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ vantas has a technical support team to answer questions about the installation and operation of your unit. If the remedy(s) in the troubleshooting guide fails to solve your problem, pl...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 28 ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○ rated continuous power output: center (20hz - 20khz 0.05% thd, 8 Ω ) --------------------------------------------------100w surround (20hz - 20khz 0.05% thd, 8 Ω ) ------------------...
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 29 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ © 1999 by vantas.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 31 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 3715 doolittle drive redondo beach, ca 90278 phone: 310-297-5700 fax: 310-297-5757 www.Vantas.Com.