1. DL manuals
  2. Vantec
  3. Network Card
  4. CB-U320GNA
  5. User Manual

Vantec CB-U320GNA User Manual - Contents:

Manual is about: USB 3.0 To Dual Gigabit Ethernet

Summary of CB-U320GNA

  • Page 1

    Usb 3.0 to dual gigabit ethernet network adapter cb-u320gna user manual ver. 1.00 all brand names and trademarks are properties of their respective owners..

  • Page 2: Contents:

    Cb-u320gna page 2 contents: chapter 1: introduction .................................................................... 3 1.1 product introduction .................................................................. 3 1.2 features..........................................................................

  • Page 3: 1.1 Product Introduction

    Cb-u320gna page 3 chapter 1: introduction 1.1 product introduction vantec introduces the usb 3.0 to dual gigabit ethernet network adapter bringing you dual gigabit ethernet through a single usb port. With the ease through a single usb connection, you can gain gigabit network speeds of up to 1000mbps...

  • Page 4: 1.2 Features

    Cb-u320gna page 4 1.2 features dual gigabit ethernet ports through a single usb connection compliant with universal serial bus 3.0 specification, revision 1.0 compatible with usb specification, revision 2.0 supports cdc-ecm supports crossover detection, auto-correction, polarity correction, adaptive...

  • Page 5: Software Offload

    Cb-u320gna page 5 supports advanced link down power saving when ethernet cable is unplugged supports acpi, apm, ospm, and wake-on-lan supports jumbo frame up to 9k bytes usb cable type a & 2 x rj45 connection led indicators for ethernet connection support windows xp, 7, 8, 8.1 / mac os x 10.8 or gre...

  • Page 6

    Cb-u320gna page 6 fully compliant with ieee 802.3, ieee 802.3u, ieee 802.3ab supports ieee 802.1p layer 2 priority encoding supports ieee 802.1q vlan tagging supports ieee 802.3az-2010 (energy efficient ethernet) microsoft aoac (always on always connected) supports 16-set 128-byte wake-up frame patt...

  • Page 7: 1.3 System Requirements

    Cb-u320gna page 7 supports selective suspend 1.3 system requirements microsoft windows xp, vista, 7, 8, 8.1 / mac os x 10.6 or greater (intel-based mac) / latest linux os usb 3.0 port preferred to get maximum speed 1.4 package contents vantec usb 3.0 to dual gigabit ethernet adapter drivers cd quick...

  • Page 8: 2.2 Driver Installation

    Cb-u320gna page 8 ethernet port on your router, switch, or any other networking device. 2.2 driver installation the following section shows you how to install the usb 3.0 to dual gigabit ethernet network adapter driver on different operating systems. Important! Please connect the usb 3.0 to dual por...

  • Page 9

    Cb-u320gna page 9 2. Follow the instructions on the screen to install the drivers. 2.2.2 installation for mac os 1. Insert the provided cd into your optical drive. Browse to the cb-u320gna folder and select the mac folder. Start the driver installation by clicking on the installation pkg. *note: act...

  • Page 10

    Cb-u320gna page 10 4. Review and click continue thru the installation. Use the default setting. 5. Enter password to continue.

  • Page 11: 2.3 Hardware Verify

    Cb-u320gna page 11 6. Click continue installation and click restart to finish installing the software 2.3 hardware verify 2.3.1 verifying for windows 1. Click on the “ device manager ” tab in the windows control panel. Start > control panel > device manager 2. Entry “ network adapters ” item, you sh...

  • Page 12

    Cb-u320gna page 12 2.3.2 verifying for mac os x 1. Open the system profiler by clicking the apple symbol in the top left corner, selecting about this mac, then select system report 2. Expand the “network” section. With the cable connected, you should see the following devices in the list..