Vantec NexStar HX2R User Manual - Jbod Mode:

NOTE:

All data previously stored on the hard drive will 

be lost! Please back up all data to a separate 

storage before continuing.

JBOD Mode:

This mode concatenates a series of physical 

drives as a single large volume; Hard Drive 1 

through 2 are combined into a storage capacity 

that is equal to the sum of each of the physical 

hard drives.

Switching to this mode will prompt to initialize 

and format the hard disks. If you choose to add a 

second hard disk at a later time, you will need to 

format the entire array of disks again.

( figure 7-C)

( figure 7-C)

( figure 7-D)

( figure 7-D)

12

RAID Mode Configuration

Port 1

Port 2

NST-620S3R-BK

Port 1

Port 2

NST-620S3R-BK

Equal Disks

Unequal Disks

JBOD 1000GB

JBOD 1500GB

Drive A

500GB

Drive B

500GB

Drive A

1000GB

Drive B

500GB

ON

JBOD

ON