л чит т нич ю н льт цию. гл т чн . Б з вы дны www.Sotmarket.Ru д бн я инф м ция т в , тзывы, бз ы и ы Инструкция vantec nst-600nu Перейти в карточку товара 8 800 775 98 98.
Copyright © 2010 vantec thermal technologies. All rights reserved. User’s manual.
Package contents: 1 nextstar fx gigabit nas adapter x1 2 ac adapter x1 3 installation guide x1 4 rubber feet x4 5 user’s cd x1 6 ethernet cable x1 7 user’s manual x1 1 2 3 4 5 6 7 trademarks ms-dos, xbox, microsoft, windows nt/2000/xp/vista/7 are trademarks of microsoft corporation. Ps3 and playstat...
1 table of contents 1. Product introduction / features 2. Parts layout 3. Nexstar fx nas manager 4. Nexstar fx nas gui 5. Samba server (smb) 6. Ftp server 7. Media server connection-xbox / ps3 8. Printer server 9. Mac installation (mac 10.5.4 or above) 10. Mapping network drives 11. Q&a 12. Warranty...
2 1. Product introduction / features thank you for purchasing nexstar fx gigabit nas adapter. Now you can easily install the nexstar fx gigabit nas adapter into your network environment. Before using this device, please read the key features below. Key features - supports one usb storage device - gi...
3 2. Parts layout lan connection operation system power indicator connect to lan reset button connect to usb storage connect power adapter connect to usb printer.
4 3. Nexstar fx nas manager 3.1 search nexstar fx gigabit nas adapter by searchdisk 1. Run the utility cd enclosed in package and navigate to the “search utility” folder. Run “sdisk.Jar”. 2. Select “search next” and when the nexstar fx is found, click “connect”. 3. The default login is “admin” for b...
5 3.2 search nexstar fx gigabit nas adapter by using windows internet explorer. 1. Open ie browser and type in the default host name “nst-600nu” in the search bar. 2. The default login is “admin” for both user name and password, click “ok” to enter conigurations..
6 4. Nexstar fx nas gui nexstar fx nas supports multi-language user interface. Please click on the respective lags to select your language. 4.1 hard disk format for irst time installation, you need to format the hard disk into fat32 ile system. This procedure can be done by clicking on the format bu...
7 4.2 status this tab provides the basic information for the nexstar fx gigabit nas adapter. Users can check irmware version and available hard drive capacity on this page. 4.3 administration you can change and modify your host & group name, and password from this page. Click “apply” to save the set...
8 note: we strongly suggest you to change the password as soon as you logged in to prevent unauthorized access. 4.4 date/time setting you can change time setting from this page. Click “ apply ” to save the setting. By default, sntp is in network time service, your can also select “synchronize to pc”...
9 4.5.1 pppoe setting pppoe (point-to-point protocol over ethernet) is an internet connection protocol allowing users to connect to the internet without a router. All local users can share one pppoe connection to access the internet. If you want to conigure the setting of pppoe for your nas, click t...
10 4.6 disk tool in this page, you can manage the hard disk setting. - format: for the irst time installation, you need to format the hard disk into fat32 system ile, this procedure applies to both new or used hard disk. - scan disk: after the scan, it will show the number of ile content and health ...
11 4.7 maintenance this page allows you to update the nexstar fx nas irmware, to go back to the default settings, or to reboot the nas system. - firmware update: follow the steps below to update the loader and irmware for the nexstar fx nas. Obtain the latest irmware from www.Vantecusa.Com. Store th...
12 5. Samba server (smb) smb server allows you to share data or iles through lan environment. A default “guest” folder is created and shared to all users from under the same network as the nexstar fx nas. Note: use only “english alphabet” for folder names and no special characters when creating new ...
13 here, we name the account “ user1 ” to demonstrate, enter password and click “ next ” to enter share management. You can “ run ” from windows start button, type “ \\ ” and follow by the nexstar fx’s ip address (eg:\\192.168.1.10) , and click “ ok ” to continue. Type “ user1 ” and password to logi...
14 now you have successfully set up the folder that you wish to share on your nexstar fx nas. This folder can be accessed from other computers on your local network..
15 5.2 how to modify user account password select the account name (“user1”) and than click “ modify ”. Enter new password and click “ apply ” to save setting. 5.3 how to delete a user account select an account you wish to delete, click “ delete ” to proceed. Please note that all the data inside the...
16 6. Ftp server remember to “ enable ” the ftp service on the status page, when you plan on using ftp server. Ftp server coniguration: the standard port for ftp service is 21. If required, you can change it into any port ranging from 1025-6550. But in general, we recommended using the default port ...
17 6.1 how to create ftp account ftp server allows you to share your data through internet, so an internet resource and router is required before setting up ftp server. Select ftp server and clicks “ add ” button and enter a name and password for the new ftp account and click “ ok ” to continue. In ...
18 note: when creating ftp accounts, please use only english alphabet and no special charac- ter or space for ftp account name. 6.2 how to delete ftp account in the “account list”, you can see an overview of the existing accounts and status; you can change them at any time by selecting the account a...
19 7. Media server connection-xbox / ps3 7.1 xbox when you turn on the xbox 360, dlna media servers on the same network are automatically detected. 1. Move to the “my xbox” page router modem (adsl / dsl, cable, etc.) to internet ethernet cable nas (dlna media server) tv xbox 360 (dlna client).
20 2. Choose the dlna media server that was connected and select the ile you want to play. 7.1 ps3™ when you turn on the ps3™ system, dlna media servers on the same network are automatically detected and icons for the detected servers are displayed under (photo), (music), and router modem (adsl / ds...
21 1. Select the icon of the dlna media server that you want to connect to under (photo), (music), or (video). All available folders and iles that can be played by the ps3™ system will be displayed. 2. Select the ile that you want to play. Note : the ps3™ system must be connected to a network. For d...
22 8. Printer server 1. Firstly, install your printer driver into your computer, (for example. If epson pl-6200l printer is connected to the nas, you must install pl-6200l driver into your computer irst). After driver installation, please click “start” “setting” “printer and faxes” “add a printer” “...
23 4. Select “ create a new port ,” “ type of port: ”, choose “ standard tcp/ip port ”, and click “ next ” to continue..
24 5. Enter the nexstar fx nas ip address (eg. 192.168.15.100), then click “ next ” to continue. 6. Select “custom” and go to “setting”..
25 7. Select “ lpr ” in protocol, and give a queue name e.G. Lrxxx; select lpr byte enable and click “ ok ” to inish the port setting. 8. Click “ finish ” to complete tcp/ip printer setup. 9. Go to “printer server page and check printer server status. If status shows “ ok ”, the printer is setting u...
26 9. Mac installation (mac 10.5.4 or above) 9.1 finding nexstar fx’s ip using the search disk utility (sdisk.Jar) 1. Copy the software tool “sdisk.Jar” from the cd-rom. 2. Run sdisk.Jar. Click ‘search next’ and the nexstar fx’s ip address will be listed. Click connect to load your web browser and p...
27 9.2 how to access files using smb(samba) 1. Click ‘go’ and navigate to ‘computer’ or use shift-command-c. 2. If the nexstar fx is in the same workgroup it will appear under shared devices( ). If the workgroup is different, please click “all...” and look for the nexstar fx. 3. After you enter into...
28 3. After you enter into the nexstar fx you can choose the existing folders and access its contents. 4. You will be prompted for log in. You can use “guest” or other identities you have created. 5. Once you have properly logged in, it will appear below “ ”..
29 9.3 how to access the nexstar fx using ‘connect to server’ 1. Click ‘go’ and navigate to ‘connect to server...’ or use command-k. 2. Type in the following: ‘smb://192.168.1.112/’ (eg. If the nexstar fx’s ip is 192.168.1.112) 3. You must log in. You can use “guest” or other identities you have cre...
30 4. Once the authentication has gone through, the nexstar fx folder will be listed under “ ”.
31 10. Mapping network drives below are directions to map the shared folders on your nexstar fx gigabit nas adapter as network drives on your computer system (showing nas disk drive in network). 1. Press the “start” button on windows desktop. 2. Open up “computer” and navigate to “network.” 3. Searc...
32 11.Q&a q: what is nexstar fx nas’s default ip? A: the default ip address is 169.254.0.1 or enter “ nst-600nu ” in ie browser bar to search for it. Q: what is nexstar fx nas default login name and password? A: the default login name is: “admin”, default password: “ admin ”. Q: forgot my login pass...
33 q: how do i access nexstar fx nas via the internet? A: if your nexstar fx nas is conigured with a ixed public ip, please perform the following steps. Enter the nexstar fx web management, and go to the ftp server page to enable ftp status. Create user account and user restrictions open microsoft i...
34 12. Warranty the nexstar fx gigabit nas adapter comes with a 1 year limited warranty (90 days parts). If your unit should become defective within that time frame, please go to www.Vantecusa.Com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are n...
л т з з любым д бным б м гл т чн я л жб дд ж и Д т в з з в в ии ф мл ни дит нл н з 2 мин ты м нии Д т в и л т вин и тзывы ции и ид и vantec nst-600nu Описание.