Vantec UGT-MH400U3 User Manual - Contents:

Manual is about: Portable 4-Port USB 3.0 Hub

Summary of UGT-MH400U3

  • Page 1

    Portable 4-port usb 3.0 hub user manual model: ugt-mh400u3 all brand names and trademarks are properties of their respective owners. Www.Vantecusa.Com.

  • Page 2: Contents:

    Ugt-mh400u3 page 2 contents: chapter 1: introduction ............................................. 3 1.1 product introduction ........................................... 3 1.2 features ................................................................ 4 1.3 system requirements ...........................

  • Page 3: 1.1 Product Introduction

    Ugt-mh400u3 page 3 chapter 1: introduction 1.1 product introduction super-speed usb 3.0 interface is the next revolution in i/o interconnect standards that will deliver the bandwidth and features required by pcs, consumer electronics and communications devices. With 10 times faster throughput than u...

  • Page 4: 1.2 Features

    Ugt-mh400u3 page 4 cameras, webcam, networking and video devices, and all other usb devices. 1.2 features provide four usb 3.0 ports compliant with usb 3.0 specification 1.0 supports simultaneous operation of multiple usb 3.0, usb 2.0 and usb 1.1 devices up to 5gbps data transfer rate hot-swapping f...

  • Page 5: 1.4 Package Contents

    Ugt-mh400u3 page 5 1.4 package contents 1 x portable 4-port usb 3.0 hub 1 x user manual 1 x power adapter (optional) 1.5 hardware description figure 1. Front.

  • Page 6: Figure 2. Back

    Ugt-mh400u3 page 6 figure 2. Back power led: the light will be on when the usb 3.0 4-port hub is powered up..

  • Page 7: 2.1 Hardware Installation

    Ugt-mh400u3 page 7 chapter 2: getting started 2.1 hardware installation 1. Plug the power adapter into the power jack of the usb 3.0 4-port hub. (if power adapter is available) 2. Plug the usb 3.0 4-port hub into your computer’s superspeed usb 3.0 port. 3. Upon powering up your computer, the usb 3.0...

  • Page 8

    Ugt-mh400u3 page 8 if system can not install usb 3.0 4-port hub driver properly, be sure to confirm system’s usb 3.0 host controller’s driver working properly. We do suggest that you may re-install your usb 3.0 host controller driver again. Chapter 3: troubleshooting tips i cannot run usb 3.0 supers...

  • Page 9

    Ugt-mh400u3 page 9 how about connecting usb 3.0 hub to traditional usb 2.0 host port? Usb 3.0 hub works, but only running under usb 2.0 high speed mode. My usb 3.0 device does not work when connect to usb 3.0 hub? Please confirm your settings as below one by one. 1. Affirm usb connection cable betwe...