Dual/quad chip 4-port dedicated 5gbps usb 3.0 pcie host card user manual model: ugt-pce430-2c/4c all brand names and trademarks are properties of their respective owners. Www.Vantecusa.Com.
Ugt-pce430-2c/4c page 2 contents: contents: ............................................................. 2 chapter 1: introduction ........................................ 3 1.1 features .............................................................. 3 1.2 system requirements ..........................
Ugt-pce430-2c/4c page 3 chapter 1: introduction 1.1 features support pci-express 2.0 specifications using x4 connection. Provides four super speed usb 3.0 type-a ports to support 5gbps each for a total transfer bandwidth up to 10gb/s for dual bus or 20gb/s for quad bus provides 2/4 chip for dedicate...
Ugt-pce430-2c/4c page 4 hot-swapping feature allows you to connect/disconnect devices without powering down the system support uasp devices on all 4 ports to further enhance performance support windows xp,7,8,8.1, server 2012, 2008 r2, 2003, and linux kernel 2.6.31 or later included standard and low...
Ugt-pce430-2c/4c page 5 1 x installation guide 1 x low profile bracket chapter 2: getting started 2.1 hardware installation 1. Verify the package contents to make sure you have everything that you need to install this card. 2. This card comes standard with the full height bracket installed, if you a...
Ugt-pce430-2c/4c page 6 board down firmly. 6. Replace the slot bracket’s holding screw to secure the card. 7. Connect the sata power or molex power from the computer system power supply to this expansion card. 8. Secure the computer cover; reconnect the power cord and power on the system. 9. Once th...
Ugt-pce430-2c/4c page 7 *note: actual image may varies 3. When the installation is done, select “finish”. 4. Your device is now ready for use..
Ugt-pce430-2c/4c page 8 2.3 to verify the hardware device 1. Click on the “device manager” tab in the windows control panel. Start > control panel > device manager 2. Double click on the “universal serial bus controllers” device and it will expand the subset showing “renesas electronics usb 3.0 host...
Ugt-pce430-2c/4c page 9 2.4 to uninstall drivers 1. Click on the “programs and features” tab in the windows control panel. Start > control panel > programs and features 2. Entry “uninstall or change a program” page, and double click “renesas electronics usb 3.0 host controller driver” to process dri...
Ugt-pce430-2c/4c page 10 chapter 3: troubleshooting tips if card and devices connected to the computer do not seem to be working properly, please perform below basic troubleshooting steps: 1. Check that all cables are correct and securely connected. 2. Make sure usb device’s power is turned on. 3....
Ugt-pce430-2c/4c page 11 1. Please shutdown your computer and move the card to another available slot then re-install usb 3.0 driver. 2. Select the device then right-click on the mouse. Selecting “update driver” to update with the latest usb driver. 3. This exclamation point usually means there is a...
