Vantron FPA-C34 User Manual - 2. Overview
FPA-C34, FPA-W34
7/ 17
2. Overview
2.1 Introduction
Thank you for choosing Vantron. It is our commitment to provide our valued
customers with the embedded devices equipped with the state‐of‐the‐art
technology and the best product services.
Vantron’s M2M products are based on the most advanced ARM and Intel Atom
processors and have low‐power consumption and high integration. The products are
designed for applications of M2M in industrials, medicals, financial, retail, vehicle,
and transportations etc.
2.2 How to setup and use the device
To use the device, please install the unit stably, and assemble its antenna(s) for
WLAN(BlueTooth), CELL and possible GPS, if the device is configured for CELL function, maybe you
need to activate the SIM card against proper carrier, and then please insert correct 12‐24V DC
cable to the power jack of the device, the device will be powered up and the PWR LED lighting
indicates the system boots up. The device have a standard RJ45 Ethernet port which supporting
10M/100M Full/Half Duplex.
The device integrates a Web Page Subsystem to provide a web page for user to control the
system. The default IP address is “192.168.0.1”, the default username and password are
“root/admin”. You can setup such as WAN, Network, CELL, Wireless via web page. Follow
guidelines of application software for further comment to the device usage please.