Vantron VT-M2M-BTA-DE Installation And Setup Manual - page 6
Vantron VT-M2M-BTA-DE ThingWorx Installation and Setup Guide
Copyright © 2015 PTC Inc. and/or Its Subsidiary Companies. All Rights Reserved.
4
10. Copy the new Executable file (lvdemo) to the VT-M2M-BTA-DE:
a. Connect to the VT-M2M-BTA-DE device from your computer.
b. Open a terminal program such as Putty.
c. From the terminal program, connect to the Ubuntu machine and copy the file to the VT-M2M-BTA-
DE using SCP.
Note: Ensure that the “run.sh”, “settings.json”, and “lvdemo” and “so” directories are located under the
same directory on the VT-M2M-BTA-DE device (preferably all in the /opt/lv-demo/ directory).
Please see the next section for connecting to the Vantron device. Please note that you should NOT
move on to section 3 of this guide until the lvdemo executable file has been copied to the VT-M2M-BTA-
DE device.