Vantron VT-M2M-Ruban User Manual

Summary of VT-M2M-Ruban

  • Page 1

    All rights reserved vt‐m2m‐ruban user’s manual vantron technology, ltd www.Vantrontech.Com.

  • Page 2

    Vt- m2m-ruban revision history: no. Version description date 1 v1.0 first release oct.10, 2014 1 v1.1 update the default ddr memory to 512mb for moon island usage feb 3, 2015 2 v1.2 1:update the order code 2:add the ethernet interface describe feb.04.2015.

  • Page 3: Table Of Contents

    Vt- m2m-ruban 1 / 27 table of contents 1 foreword ..................................................................................... 3 1.1 copyright notice ...................................................................... 3 1.2 notes .............................................................

  • Page 4

    Vt- m2m-ruban 2 / 27 3.4.6 usb host connector ................................................ 21 3.5 operation notice .................................................................... 22 3.5.1 change sim card ..................................................... 22 3.5.2 power supply ..............

  • Page 5

    Vt- m2m-ruban 3 / 27 1 foreword 1.1 copyright notice while all information contained herein have been carefully checked to assure its accuracy in technical details and printing, vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manua...

  • Page 6

    Vt- m2m-ruban 4 / 27 the trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of vantron. Vantron reserves the ...

  • Page 7

    Vt- m2m-ruban 5 / 27 1.5 limitation of liability/non‐warranty for direct or indirect damage to this device or other devices of vantron caused by failure of conforming to this manual or the safety instructions on device label, vantron assumes neither warranty nor legal liability even if the device is...

  • Page 8

    Vt- m2m-ruban 6 / 27 1.7 precautions  pay attention to the product labels/safety instructions printed on silk screens.  do not try repairing this product unless declared in this manual.  keep away from heat source, such as heater, heat dissipater, or engine casing.  do not insert other items int...

  • Page 9

    Vt- m2m-ruban 7 / 27 1.8 safety instructions for power cables and accessories proper power source only start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of vantron for any uncertainty about the req...

  • Page 10

    Vt- m2m-ruban 8 / 27 cleaning instructions  please power off before cleaning the device.  do not use spray detergent.  clean with a damp cloth.  do not try cleaning exposed electronic components unless with a dust collector.  support for special fault: power off and contact technical support pe...

  • Page 11

    Vt- m2m-ruban 9 / 27 2 overview 2.1 introduction thank you for choosing vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state‐of‐the‐art technology and the best product services. Vantron’s m2m products are based on the most advanced arm and i...

  • Page 12

    Vt- m2m-ruban 10 / 27 2.2 product series 2.2.1 product order coding rule 2.2.2 ordering information order examples: vt-m2m-ruban-4-256m-8gf quark processor, 400mhz cpu, 256mb ddr3, 8g flash,gprs vt-m2m-ruban-4-256m-16gf-3gw quark processor, 400mhz cpu, 256mb ddr3, 16g flash,gprs, 3g vt-m2m-ruban-4-5...

  • Page 13

    Vt- m2m-ruban 11 / 27 3 m2m‐ruban hardware instructions 3.1 product appearance front side view back side view.

  • Page 14

    Vt- m2m-ruban 12 / 27 view for all optional embedded modules and antennas.

  • Page 15

    Vt- m2m-ruban 13 / 27 bottom view for optional embedded modules 3.2 specifications specifications cpu processor intel® atom ™ , quark soc,a0,x1021, 400mhz memory on board ram ddr3 800mt/s 512mb optional 256mb /1gb down memory.

  • Page 16

    Vt- m2m-ruban 14 / 27 rom internal on board 64mb spi flash 1xmicrosd card external storage wireless communication wlan optional 802.11 b/g/n wireless module, external antenna 3g module optional1x pcie 3g broad band module with sim slot zigbee optional low power zigbee module, external antenna gprs g...

  • Page 17

    Vt- m2m-ruban 15 / 27 environment condition temperature operating:-0°c ~ +60°c ( etr:-40°c ~ +80°c optional) storage: -20°c ~ +70°c, ( etr:-40°c ~ +85°c optional) humidity 5-95%rh at 25-35 (non-condensation) cooling mode fan less, heat sink approvals ul, fcc class b, and ce.

  • Page 18

    Vt- m2m-ruban 16 / 27 3.3 dimension.

  • Page 19

    Vt- m2m-ruban 17 / 27 3.4 interface description 3.4.1 wide‐range power interface power jack 1x3x5.08mm pin description 1 dgnd (ground pin) 2 power (+6 to +36v) 3 chassis gnd no.1.

  • Page 20

    Vt- m2m-ruban 18 / 27 3.4.2 ethernet interface standard rj45 interface, supporting 10m/100m self‐adaptation, this is a standard rj45 ethernet port pin description remarks 1 tdp io 2 tdn io 3 rdp io 4 nc 5 nc 6 rdn io 7 nc 8 nc note: green led of rj45 is the led_link pin, in mode 2(default mode) will...

  • Page 21

    Vt- m2m-ruban 19 / 27 3.4.3 d sub‐9 rs232 connector standard vertical 2x db‐9 male connector pin description remarks 1 dcd1/485_a jumper set 2 rxd1/485_b jumper set 3 txd1 4 dtr1 5 dgnd (ground pin) 6 dsr1 7 rts1 8 cts1 9 nc.

  • Page 22

    Vt- m2m-ruban 20 / 27 3.4.4 d sub‐9 rs232 connector standard vertical 1x db‐9 male connector for debug pin description remarks 1 nc 2 rxd1_d input 3 txd1_d output 4 nc 5 nc 6 dgnd ground 7 nc 8 nc 9 nc.

  • Page 23

    Vt- m2m-ruban 21 / 27 3.4.5 led pwr led: light system power ok(main power up);off system power turn off status led:blink sata hdd active. 3.4.6 usb host connector dual vertical usb a type interface, usb2.0 pin description a1 usb1_vcc(+5vdc) a2 usb1_d‐ a3 usb1_d+ a4 usb1_dgnd(ground pin).

  • Page 24

    Vt- m2m-ruban 22 / 27 3.5 operation notice 3.5.1 change sim card push the small button on the left of sim card holder, and install the sim card to the holder. Then push the holder into the slot. 3.5.2 power supply please make sure using adapter in the accessory, or the power is not reversed when pow...

  • Page 25

    Vt- m2m-ruban 23 / 27 4 tips waste disposal it is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or...

  • Page 26

    Vt- m2m-ruban 24 / 27 keep away from all energized circuits. Operators should not remove enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device. Do not change components unless...

  • Page 27

    Vt- m2m-ruban 25 / 27 notice considering that reasonable efforts have been made to assure accuracy of this manual, vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessar...

  • Page 28

    Vt- m2m-ruban 26 / 27 —consult the dealer or an experienced radio/tv technician for help. Any modification to the product is not permitted unless authorized by vantron. It’s not allowed to disassemble the product, it is not allowed to replace the system or change components unless with permission an...

  • Page 29

    Vt- m2m-ruban 27 / 27 us office: vantron technology, inc. Address: 1292 kifer road #807, sunnyvale, ca 94086 tel: 510-304-7666 email: sales@vantrontech.Com china office: chengdu vantron technology,ltd address: 3rd floor, 3rd building, no.9, 3rd wuke east street, wuhou district, chengdu, p.R. China 6...