VAPamore MP-100 Primo Instruction Book And Users Manual - page 4
The accessories attach directly to the detail adapter
by pushing the accessory straight on the detail adapter
and then twist to lock in place. (Fig. 3)
Do not use excessive pressure on the
accessory tools. Let the steam do the work with light
scrubbing action used on the accessory tool.
Accessory
compartment
The MR-100 Primo accessory compartment houses
the detail adapter, Jet nozzle attachment, dipstick,
clothes / fabric tool, micro fiber pad, cotton pad
and all brushes. Open the accessory compartment
by pulling the accessory cover back, away from the
machine. Remove the desired accessory from
the accessory compartment and close the accessory
cover. (Fig. 1)
Connect the steam hose to the steam socket on
the front of the steam cleaner. To do this flip down
the dust cover door and push the connector on the
steam hose firmly into the socket until both tabs
click into place. To remove the steam hose, press
in both release tabs located on the left and right side
of the steam hose connector and pull out to release
from the socket. (Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
!
STEAM CLEANER ASSEMBLY
Accessories twist lock onto the adapter
The detail adapter MUST BE USED with all accessories.
the detail adapter can be used directly to the steam gun
or to the extension tubes. Attach the detail adapter
by pusing on to the steam gun or extesion tube until the
lock tab clicks in place. (Fig. 2)
STEAM GUN & HOSE
(Fig. 5)
Detail adapter
!