Quick start guide english.
What’s included » [ 1 ] 75 watt tc mod » [ 1 ] usb charger » [ 1 ] user guide.
Using device to turn on the vex 75w tc mod, press the power button five times, you will do the same to turn off the device as well. Before using the device, make sure you are in the correct mode depending on the atomizer you are using. To adjust modes, press the power button 3 times to enter the des...
Temperature control if you are planning to use an atomizer in one of three temperature modes, press the power button 3 times to enter the designated menu. Once in the menu, press the – button, you will notice that the modes will begin to flash. Now, press the + button to scroll through the different...
Note: when using new atomizers in temperature control mode, it is important to start at lower temperatures to avoid burning your atomizer. Battery life there is a battery meter at the bottom of your screen, that will display the device’s current battery strength. As you use the device, this meter wi...
Note: while the device is charging, you can still enjoy your favorite e-liquid. Keep in mind, while it is possible to continue use during charging, it drastically slows down the process..
Power button/ fire button oled display down button up button usb port spring loaded 510 connector.
Warning do not attempt to modify equipment; doing so can result in permanent damage, overheating and/or explosion which may lead to severe injuries or death. For more information visit: vaporfi.Com/how-it-works.
Disclaimer vaporfi products are not smoking cessation products and have not been tested as such. The u.S. Fda has not approved these products for any use and they are not intended to diagnose, cure, mitigate, treat or prevent any disorder, disease, or physical or mental condition. Some vaporfi produ...
Guia de inicio espaÑol.
¿quÉ viene incluido? » [ 1 ] 75 watt tc mod » [ 1 ] cargador usb » [ 1 ] guia de usuario.
Uso del dispositivo para encender el vex 75w tc, presione el botón de encendido cinco veces, repita el mismo procedimiento para apagarlo. Antes de utilizar el dispositivo, asegúrese de que está configurado en el modo correcto dependiendo del atomizador que usará. Para cambiar de modo, presione el bo...
Control de temperatura si planea utilizar el atomizador en uno de los tres modos de temperatura, presione el botón de encendido 3 veces para ingresar al menú designado. Una vez allí, presione el botón – y notará que los modos comenzarán a parpadear. Ahora presione el botón + para pasar por todos los...
Vida de la baterÍa hay un medidor de batería en la parte inferior de la pantalla que mostrará el estado actual de la batería del dispositivo. A medida que use el dispositivo, el medido continuará disminuyendo hasta que el dispositivo ya no pueda encenderse y aparezca el mensaje “batería baja” en la ...
Nota: cuando el dispositivo se está cargando, podrá seguir disfrutando de su líquido favorito. Tenga en cuenta que, a pesar de que es posible utilizar el dispositivo mientras se carga, hacerlo disminuirá la velocidad de carga drásticamente..
Boton de encendido pantalla oled boton de abajo boton de arriba puerto usb conector de resorte de 510
Advertencia no intente modificar el equipo; hacerlo puede resultar en daño permanente, sobrecalentamiento y/o una explosión que puede provocar lesiones graves o la muerte. Por más información visite: vaporfi.Com/how-it-works.
ExenciÓn de responsabilidad los productos vaporfi no son productos para dejar de fumar ni se han probado como tales. La fda de los ee .Uu. No ha aprobado estos productos para ningún uso ni están indicados para diagnosticar, curar, mitigar, tratar o prevenir cualquier trastorno, enfermedad, o condici...
Vaporfi.Com.