- DL manuals
- Vari
- Brush Cutter
- 432HB
- Instructions For Use Manual
Vari 432HB Instructions For Use Manual
Summary of 432HB
Page 1
En vari 432hb brushcutter instructions for use, maintenance and spare parts (translation of the original instructions for use) read carefully this manual before any use warning: look for this symbol to point out important safety precautions. 2013.
Page 2
En 2 security rules: before starting this brushcutter is only made for cutting grass, bush, arborescent shrub, and clumps. Any other use of the brushcutter unmentioned in this manual could involve danger for your personal security. • read carefully the security advises in this manual before any use ...
Page 3
En 3 security pictograms 1. Warning, danger, caution 2. Read documentation and safety instructions which are provided in this user manual. 3. During the use of the machine, use protective equipment to protect the hearing and eyesight. Wear a protective helmet. 4. Wear security shoes as well as glove...
Page 4
En 4 11. Hot surface, risk of burn. Security pieces description. A) security helmet b) head-phones c) face shield against possible projections d) harness e) gloves f) cutting device protection g) security shoes 12. Danger, risk of fire or explosion. H) heavy duty work suit i) anti-vibrating support ...
Page 5
En 5 technical characteristics model aw-bc643 trade name vari 432hb dry weight (without cutting tools and fuel) 7.6 kg engine type lh1e40f-5a fuel tank capacity (litres) 0.95 l blade diameter (mm) 255 blade thickness (mm) 1.5 number of teeth 3 fixation hole diameter (mm) 25.5 max. Blade rotation spe...
Page 6
En 6 -adjust the position of the fixation on the tube of the machine, in order to obtain a good balance between the rear and the front of the machine. -if you use the machine with nylon head, you must adjust the belt in a way that the distance between the ground and the nylon head is in between 0 an...
Page 7
En 7 involve serious injury and damages to persons and properties. The manufacturer declines all responsibility in case of faulty use of the machine. Before starting the work before any work with the machine, make sure that the cutting tool has been perfectly assembled, tightened and correctly centr...
Page 8
En 8 2. Press on the purge bulb under the carburettor 4 or 5 times, to allow the gasoline to arrive on the return fuel tank transparent gasoline pipe. 3. Move the starter lever of the carburettor in this position. 4. With your left hand, grip the brushcutter (make sure that the machine is well-balan...
Page 9
En 9 grass cutting cut the grass, like if you were in a corridor of 1.5 meters wide, move step by step balancing the machine right and left, and vice-versa. Make sure at each step that you are still well balanced on your feet. If you are using the 3-teeth blade for the grass, always cut from right t...
Page 10
En 10 maintenance carburettor adjustment during a normal use, the carburettor may have some slight changes, especially, when there are some changes of working conditions and after many hours of work or because of variation of temperatures or pressures in the surrounding. Carburettor adjustment at hi...
Page 11
En 11 problems power loss or sudden stopping of the engine - check that the tank is not empty. - the mixture does not reach to the carburettor. Clean or change the fuel filter in the fuel tank. - there is water in the mixture. Clean all the alimentation system. - the air filter is dirty. Clean the a...
Page 12
En 12 warning using the engine with a gasoline/oil mixture that is not conforming to the requirements of the manufacturer will cancel the warranty. Use the machine only with the cutting tools provided by the manufacturer. The use of the brushcutter with a saw blade is strictly forbidden. Disposal of...
Page 13
En 13 list of spare parts the spare part list is not a part of these instructions for use. The latest version of the catalogue can be downloaded from our internet site. If you have no access to the internet, ask your dealer to get it for you..
Page 14
En 14 ec declaration of conformity ec declaration of conformity according to act no. 22/1997 gaz. (as amended) 1) supplier: vari, a.S., opolanská 350, 289 07 libice nad cidlinou, czech republic reg. No.: 00660574, vat no.: cz00660574. Registered in the company register at municipal court of praha, s...
Page 15
En 15 ec declaration of conformity according to act no. 22/1997 gaz. (as amended) 1) supplier: vari, a.S., opolanská 350, 289 07 libice nad cidlinou, czech republic reg. No.: 00660574, vat no.: cz00660574. Registered in the company register at municipal court of praha, section b, insert 4457 2) tech...
Page 16
En 16 letter of guarantee information on the purchased machine name of product brushcutter model vari 432hb serial number …………………………… engine serial number …………………………… warranty (months) …………………………… output control …..……………………..... Information on the purchaser name of purchaser ………………………………………………………………...
Page 17
En 17 a) the product was not used and maintained as specified in the instructions for use, or it was damaged by any unauthorized operation by the user or third person; b) the product was used in conditions or for purposes other than specified; c) the letter of guarantee for the product cannot be pre...
Page 18
En 18 record of warranty and post-warranty repair carried out (the warranty repair may only be carried out in an authorized service workshop of vari, a.S.) date of repair description of work carried out replaced parts signature of the technician and stamp of the service workshop.