1. DL manuals
  2. Vari
  3. Trimmer
  4. KC-435
  5. Instructions For Use Manual

Vari KC-435 Instructions For Use Manual

Summary of KC-435

  • Page 1

    Brush cutter / trimmer kc-435 instructions for use en english – translation of the original instructions for use.

  • Page 2

    Kc-435 2 content 1 en instructions for use 3 en basic information ask your dealer to unpack the machine and provide you with instructions as a part of the pre-sale services! En type kc-435 en stick the identification plate here: en engine type honda gx35 en identification number 1 10052_____.____.__...

  • Page 3

    Kc-435 3 1 en instructions for use content 1 en instructions for use 1.1 introduction ................................................................................................................................. 5 1.1.1 basic notices .................................................................

  • Page 4

    Kc-435 4 1.5.1 refilling the cutting string ................................................................................................. 16 1.5.2 sharpening the cutting blades of the grass blade ............................................................. 17 1.5.3 maintenance and adjusting of ...

  • Page 5

    Kc-435 5 1.1 introduction dear customer and user! Thank you for the confidence you demonstrated by purchasing our product. You have become the owner of a machine from a broad range of gardening, farming, small agricultural and municipal machinery, produced by vari, a.S. The brush cutter/trimmer is a...

  • Page 6

    Kc-435 6 ! Read and study all instructions carefully. Familiarize yourself well with control elements and with principles of their correct usage. Learn the correct way to stop the engine quickly. ! Use the brush cutter/trimmer only for the purposes it is intended for, i.E. For cutting grass using th...

  • Page 7

    Kc-435 7 − when any persons or animals appear nearby − the engine can only be running when adjusting the carburettor or the engine revolutions − if a foreign object is hit. Check whether the brush cutter/trimmer is damaged; repair it when necessary and continue the work only after it is put into nor...

  • Page 8

    Kc-435 8 protect the hearing with suitable protective aids according to en 352-1 (shell hearing protectors) or en 352-2 (plug hearing protectors). Ask your dealer for these aids. Interrupt the work with the machine after no more than 20 minutes with breaks of at least 10 minutes. The operator can’t ...

  • Page 9

    Kc-435 9 honda gx 35 engine displacement cm 3 35,8 bore / stroke mm 39 x 30 max. Engine revolutions min -1 10000 engine revolutions at idle running min -1 3100 ± 200 valve train system ohc cooling system air ignition system transistor power (according to iso 8893) kw (hp) 1,0 (1,3) / 7000 min -1 pow...

  • Page 10

    Kc-435 10 1.4.1.1 handlebar assembly put the handlebars (1) on the anti-vibration element (2) and screw it using bolts (3) and washers (4). Remove the cable cover (5) from the anti-vibration element (1), pass the cables (6) and put the cover back on the anti-vibration element. The cables and the acc...

  • Page 11

    Kc-435 11 1.4.1.5 mounting and adjustment of the harness for safety and comfort of the operator it is very important to properly adjust the harness for the particular figure, so that it is possible to operate the brush cutter/trimmer with the highest possible comfort and the hanging brush cutter/tri...

  • Page 12

    Kc-435 12 place the brush cutter/trimmer in a working position to make the work easier. Make sure that the brush cutter/trimmer is in a stable position, so that the fuel can’t be spilled unintentionally. See detailed information in the instructions for use of the engine 10 . 1.4.2.3 adding the motor...

  • Page 13

    Kc-435 13 move the engine switch (1) to the position “start” (i). Move the choke lever (2) to the upper position (choke on). Push the fuel pump balloon (3) under the carburettor several times. Pull the starter handle (4) slowly until you feel a resistance. Then tug quickly, so that the engine starts...

  • Page 14

    Kc-435 14 1.4.3.3 switching off the engine move the engine switch (2) to position stop (o) to switch the engine off. Use the same procedure for engine emergency stop. ! Always keep in mind that the cutting tool is rotating by inertia force for some time after the engine is switched off. 1.4.4 workin...

  • Page 15

    Kc-435 15 1.4.4.2 using the grass blade the maximum diameter of the blade has to be 255 mm. Cutting the three-tooth grass blade is intended for cutting grass at hardly accessible places, cutting high and overgrown vegetation and even woody sprouts with a diameter of up to 2 cm. If the high vegetatio...

  • Page 16

    Kc-435 16 1.5.1 refilling the cutting string block the gearbox using the hex key. Unscrew the nylon head from the angular gearbox shaft, turning it clockwise. Push latches (1) on sides of the nylon head and remove the cover with the spool. Take off the spool (2) and remove the rest of the nylon stri...

  • Page 17

    Kc-435 17 1.5.2 sharpening the cutting blades of the grass blade perfect results of the cutting tool can only be ensured if the blades are properly sharpened. Slight sharpening can be done with a hand sharpening stone. For bigger blunting it is necessary to use a tool sharpener. In any case it is ne...

  • Page 18

    Kc-435 18 1.5.5 servicing intervals maintenance intervals – carry out in given monthly intervals or after given working hours, depending on what comes sooner before each use the first month or 10 working hours each 3 months or 25 working hours each 6 months or 50 working hours each year or 100 worki...

  • Page 19

    Kc-435 19 1.5.6 problems and their solutions problem cause solution the engine does not start not enough fuel in the tank fill in the fuel engine switch in stop (0) position move the switch to start (i) position spark plug not installed correctly or not connected check connection and tightening of t...

  • Page 20

    Kc-435 20 1.6 transportation and storing 1.6.1 transportation ! The engine must always be off and the safety cover must be put on the cutting tool during transport. During transport, the brush cutter/trimmer must be properly secured and fastened in such a way that it can’t come loose and the oil fil...

  • Page 21

    Kc-435 21 1.6.4 putting the machine into operation after longer storing dismount the spark plug and check its condition. If necessary, adjust the required electrode gap and clean it. Pull the starter handle several times and crank the engine. Install the spark plug back and fix it properly. As soon ...

  • Page 22

    Kc-435 22 text and illustrations © 2011 vari, a.S. Vl-155-2011.