Variquest Design Center 1000 Unpacking And Setup Instructions

VariQuest™ Design Center 1000 (DC1000) Unpacking and Setup Instructions

(continued on other side)

Step 1: unpack the box and check the contents.

Step 2: remove the rear cover.

The DC1000 and its 

accessories are packed in a 

cardboard carton with foam 

padding for protection 

during shipment. Carefully 

unpack the system and keep 

the packing materials for 

future use.

Verify that all of the items 

shown below are included in 

the box. If an item is missing 

or appears to be damaged, 

contact your VariQuest 

Dealer immediately.

Documentation:

•

DC1000 User’s Guide

Power Cable           Windows OS

                                 CD-ROM

VariQuest Design Center 1000

A. Rotate the display until it is 

perpendicular.

B. Open the rear cover latches.

C. Remove the rear cover.