VARIZOOM Solo Slider Dolly User Manual

Summary of Solo Slider Dolly

  • Page 1

    Thanks for purchasing a solo slider dolly from varizoom. This lightweight track dolly is very easy to set up and use, but because it is rolling camera support, you must exercise caution when operating the solo slider dolly. Without proper setup and operation, damage to the equipment and/or injury to...

  • Page 2

    Step 1 – setting up the track 1) start by connecting the first 2 track pieces with one of the crossmembers. 2) now add the underpads below the 2 track pieces. Continue adding track pieces and underpads until you have the desired length. 3) connect the final 2 track pieces with the second crossmember...

  • Page 3

    Step 3 – attaching the tripod to the dolly the solo dolly can accept a wide range of tripods. The foot locks can slide along the entire length of the dolly legs to accommodate different footprints from various tripods. The jaws of the foot locks open wide enough to fit most tripod feet. We also incl...

  • Page 4

    You can also add a mini tripod, or hi hat, to the solo slider dolly for low angle creative shots. Depending on your setup, you may want to add a bit of weight to add stability (as long as you don’t exceed the 45lbs recommended payload). For example, if you’re using the solo slider dolly with a light...

  • Page 5

    -tip: if any of the track pieces seem to fit a bit loosely and make noise when rolling over the joints, apply a thick wax or something like chapstick on the end fittings to silence the joint. Www.Varizoom.Com accessories: vztrb – rock bag for weighting tripods solo jib-al – aluminum jib solo jib-cf ...