VARIZOOM VZ-WFF Instruction Manual - page 8
Transmitter Indicators
POWER
LED: The red/green power LED has four modes of
operation:
Green
: Unit on and transmitting, battery voltage
OK.
Flashing Green
: The unit has not been used for
more than 15 minutes, so the RF transmitter has
been turned off to save power. Changing any
control or moving the knob turns the transmitter
back on within 15 /1000 of a second.
Red
: The LED will turn red approximately 1 hour
before the 9V battery needs replacement.
Flashing Red
: The LED will begin flashing red when
the battery voltage has gotten so low the transmitter
can no longer function accurately. The RF
transmitter will be shutdown to prevent inaccurate
operation.
RUN/STOP
LED: The blue run/stop LED flashes when the camera
run/stop switch is in the run position.
Transmitter Connectors
POWER IN
Connector
:
This 2-pin connector is provided to allow
the WFF Transmitter to be powered by an external
battery. The Transmitter will operate on any voltage
from 7 to 15 VDC. It draws 30 milliamps of current.
Pin 1 is positive, pin 2 is negative.
pg. 8
Warranty
VariZoom warranties the WFF for manufacturing defects or
component failure under normal operation for 1 year from the date
of purchase. VariZoom will pay shipping UPS ground within the
United States to return the unit after repairs.
pg. 17