Varta MARINE S65 Instruction Manual - Varta Marine S65
VARTA MARINE S65
3
• Make sure the wire of the negative pole terminal is disconnected from accumulator while connecting the speaker terminals. Turn on the various
components and slowly advance the volume. Remember to check and re-check all connections to insure proper installation and use.
• Do not continuously use the speaker system beyond the nominal power handling capacity.
• Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the
magnets in the speakers.
• If you cannot find the appropriate mounting location, consult your nearest dealer before mounting.
CAUTION: Take extreme caution when working near the fuel tank, fuel lines or hydraulic lines and electrical wiring.
Mounting the speakers
Installation kits are available from your dealer or local stereo shop to help make your installation easy. These kits also give your installation a clean, custom
appearance. Questions about installations methods please consult a professional dealer/installer for assistance.
• Choose the place of installation for acoustic system. For most acoustic system stipulated regular places in the water craft approach. In this case you need
to know only assembly depth. Before installation acoustic system check up their assembly depth.
• At a choice of a non-standard arrangement of speakers at which it is necessary to cut them in panels of the water craft, use a mould (not included). For
achievement of ideal arrangement of acoustic system keep up geometry of a mould, as it is very important for correct installation of your system
(А=В=132 mm, ØС=5 mm).