Varta V-C1.0B Instruction Manual - V-C1.0B
V-C1.0B
5
3.
When the capacitor has been fully charged, the decimal point display will not
flicker and you will see the display shows the DC voltage of the car electronic
system.
4.
If the DC voltage of the car electronic system exceeds over +/- 0,1 ampere, the
digital pcb will automatically operate (ex.: the car audio system hits the bass or use
some other high consumed electronic equipment, which cause large voltage drops).
5.
If the DC voltage of the car does not exceed over +/- 0,1 ampere, the digital pcb
will keep one original “on” status for one minute to assure the car electronic system
is stable. The digital pcb will automatically turn off and stay in “stand-by” mode.
6.
If the DC voltage of the car electronic system exceeds over +/- 0,1 ampere, the
capacitor will automatically operate again.
Safety Protection Function: If the user accidentally reverses the polarity of (+) and (-),
it can cause a damage to the system and also be harmful for the user. Therefore, there is a
pcb relay inside which protects wrong connection and the unit will not turn on and the
buzzer will warn. The digital power capacitor will only turn on if all wiring is connected
correctly as per instruction.