Vt150 diamondvue series user guide 150-005 vt150 diamondvue series 15.0” flat panel series lcd monitors vt150p · vt150p-ss · vt150pi vt150r · vt150w · vt150m transflectives: vt150ptsr · vt150psstsr vt150rtsr · vt150wtsr · vt150mtsr vartech systems inc. Solutions for demanding applications industrial...
Table of contents page page section 1 section 4 introduction 1 touch screen 10 1.1 about lcd monitors 1 4.1 introduction 10 1.2 product safety precautions 2 4.2 installation 10 section 2 section 5 display setup 3 troubleshooting tips 11-12 display features 3 2.1 unpacking the display 4 section 6 2.2...
Vt150 diamondvue series user guide 150-005 lcds introduction introduction 1 section about lcd monitors what you gain by using an lcd monitor in your industrial controls are the future of display technology. Although crts have dropped in cost significantly, they do not offer the performance, reliabil...
Product safety precautions ⇒ ensure that sufficient space is available around the display to provide the circulation necessary for cooling. ⇒ ensure that the ambient air temperature will not exceed the specified maximum temperature. ⇒ do not attempt to service this display yourself. The rear chassis...
Vt150 diamondvue series user guide 150-005 section 2 display setup display setup vt150 series display features ⇒ capable of displaying unlimited colors in a continuous spectrum. The high contrast lcd enhances the image with no geometric distortion. ⇒ the vt150 diamondvue series directly accepts an a...
⇒ vt150r, vt150p, vt150pss, vt150m, vt150w, vt150pi lcd monitor or vt150ptsr, vt150psstsr, vt150rtsr, vt150wtsr or vt150mtsr transflective ⇒ 5 ft video cable ⇒ 10-32 mounting hardware. (for use with panel mount only) ⇒ 6 ft rs232 touch interface cable (optional when touch is installed) ⇒ cd rom with...
Vt150 diamondvue series user guide 150-005 2.5 signal connections cont. You can use an hd-15 connector cable or a bnc adapter cable to connect the flat panel monitor to the host computer. The hd-15 video cable (supplied in the kit) you use with this monitor is equipped with a conventional hd-15 conn...
Optional bnc adaptor cable a 5bnc-to-hd15 adapter cable is available. The functions of the cables are described below. ⇒ r, b, and g: red, green, and blue input connectors to establish color. These are used for rs-343 analog signals. ⇒ hs/cs: separate horizontal/composite sync signal from the video ...
Vt150 diamondvue series user guide 150-005 getting started getting started 3 section 3.1 adjusting the display the vt150 diamondvue series display has an embedded microprocessor in the converter card. Once you have the unit displaying the resolution you desire for your application do the following: ...
3.3 adjustment osd agent description picture used to fine tune and get the best image by removing noises that create unstable images with jitters and shimmers. Brightness adjusts the brightness of pc rgb’s brightness. Contrast adjusts the contrast of pc rgb’s contrast. Clock removes the noises. When...
Vt150 diamondvue series user guide 150-005 9 3.3 adjustment osd agent description utility used to adjust osd window characteristics. Osd timeout adjusts the osd disappear time. Osd background adjusts the osd transparency. Auto adjust function of executing auto adjustment. Factory reset function of i...
Touch screen touch screen 10 4 section touch screens are a common means to interface operator inputs to a system. The universal standard of windows gui (graphical user interface) has significantly increased the use of touch screens. There are four main touch technologies. The technologies are resist...
Vt150 diamondvue series user guide 150-005 11 trouble troubleshooting tip no picture ⇒ the signal cable should be properly connected to the display card and computer. ⇒ try disconnecting the video cable from the display and connecting to a crt display if available to confirm the presence of proper v...
12 trouble troubleshooting tip screen is blank. Screen saver activated. Video cable problem. Check for proper installation change video cable . Faulty video display. Needs service. Image is dim, even with brightness and contrast controls set full up video cable problem. Check for proper installation...
Vt150 diamondvue series user guide 150-005 cleaning and maintanence cleaning and maintanence cleaning occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to...
Panel mounting procedure 1. Cut and drill the panel (refer to panel mount drawing). Measurements are in inches. Panel mounting cutout 2. If access to the side of the monitor is not available following installation, attach the power and video cables to the side of the monitor at this time. 3. Install...
Vt150 diamondvue series user guide 150-005 21 specifications specifications 8 section engineering specifications panel size 15.0” type tft active matrix w/ anti-glare coating resolution capabilities vga to sxga pixel pitch 0.297mm active display area 150m / 150w: 11.97” x 8.95” / 304mm x 227mm 150pi...
150-005-013 8.27.04 vartech systems headquarters 11529 sun belt ct. Baton rouge, louisiana 70809 toll-free: 800.223.8050 international phone: 001.225.298.0300 fax: 225.297.2440 e-mail: sales@vartechsystems.Com www.Vartechsystems.Com.
