1. DL manuals
  2. VarTech Systems
  3. Monitor
  4. VT190PC
  5. User Manual

VarTech Systems VT190PC User Manual

Manual is about: 19.0” Flat Panel Series

Summary of VT190PC

  • Page 1

    Vt190 colorvue user guide 150-077 vt190 colorvue series 19.0” flat panel series lcd monitors vt190pc vt190rc vartech systems inc. Solutions for demanding applications industrial crt and flat panel displays user’s guide read these instructions completely before attempting to operate your new color di...

  • Page 2: Table of Contents

    Table of contents section page section page section 1 section 5 introduction touch screen 14 1.1 about lcd monitors 1 5.1 introduction 14 1.2 product safety precautions 2 5.2 installation 14 section 2 section 6 display setup troubleshooting tips 15 2.1 display features 3 2.2 unpacking the display 4 ...

  • Page 3: Introduction

    Vt190 colorvue user guide 150-077 introduction introduction 1 section about lcd monitors what you gain by using an lcd monitor in your industrial controls lcds lcds lcds are the future of display technology. Although crts have dropped in cost significantly, they do not offer the performance, reliabi...

  • Page 4: Product Safety Precautions

    Product safety precautions ⇒ ensure that sufficient space is available around the display to provide the circulation necessary for cooling. ⇒ ensure that the ambient air temperature will not exceed the specified maximum temperature. ⇒ do not attempt to service this display yourself. The rear chassis...

  • Page 5: Display Setup

    Vt190 colorvue user guide 150-077 ⇒ capable of displaying unlimited colors in a continuous spectrum. The high contrast lcd enhances the image with no geometric distortion. ⇒ the vt190 colorvue series directly accepts an analog 5 wire rgb with separate h/v sync. ⇒ the vt190 colorvue series is auto sy...

  • Page 6: Signal Connections

    ⇒ vt190rc or vt190pc lcd monitor ⇒ 5 ft video cable ⇒ 10-32 mounting hardware. (for use with panel mount only) ⇒ 6 ft rs232 touch interface cable (optional when touch is installed) ⇒ cd rom with touch screen drivers (optional when touch is installed) ⇒ users guide (printed or on cd) 4 2.2 unpacking ...

  • Page 7

    Vt190 colorvue user guide 150-077 2.5 signal connections cont. You can use an hd-15 connector cable or a bnc adapter cable to connect the flat panel monitor to the host computer. The hd-15 video cable (supplied in the kit) you use with this monitor is equipped with a conventional hd-15 connector at ...

  • Page 8

    Optional bnc adaptor cable an hd-15 to 5-bnc adapter cable is available. The functions of the cables are described below. ⇒ r, b, and g: red, green, and blue input connectors to establish color. These are used for rs-343 analog signals. ⇒ hs: separate horizontal sync signal from the video source. ⇒ ...

  • Page 9

    Vt190 colorvue user guide 150-077 control function power menu use this button to enter or exit the on screen display. Sel use this button to enter a selection in the on screen display. Use these button to choose or adjust items in the on screen display. Use this button to turn the monitor on and off...

  • Page 10

    3.3 on screen display (osd) control adjustment screen adjustment operation procedure 1) entering the screen adjustment the setting switches are normally at stand-by. Push the menu button once to dis- play the main menu of the screen adjustment. The adjustable items will be dis- played in the main me...

  • Page 11

    Vt190 colorvue user guide 150-077 the following table indicates all the on screen display control, adjustment, and setting menus. 9 3.3 on screen display (osd) control adjustment cont. Main menu sub menu a d reference brightness brightness to adjust the brightness and contrast of the screen contrast...

  • Page 12: 1024X768 70Hz

    Osd - on screen display icon function description brightness adjusts the brightness of the screen. Contrast adjusts the contrast of the screen. Preset color 9300k / 6500k • 9300k: default to 9300k color temp • 6500k: default to 6500k color temp • user mode: used to adjust rgb red (user mode) adjusts...

  • Page 13

    Vt190 colorvue user guide 150-077 3.3 on screen display (osd) control adjustment cont. 11 osd - on screen display icon function description clock adjusts the number pixels per line phase adjusts the adc pixel clock auto config d-sub input source only use the ▲ and ▼ buttons to scroll up and down in ...

  • Page 14

    3.3 on screen display (osd) control adjustment cont. 12 osd - on screen display icon function description osd adjust adjusts miscellaneous osd settings osd position used to setup the osd menu position. The item “osd position” is used to setup the osd menu position. The osd menu horizon- tal and vert...

  • Page 15

    Vt190 colorvue user guide 150-077 13 display timing 4 section applicable video timing the following table lists the better display quality modes that these lcd monitors provide. If the other video modes are input, the monitor will stop working or display unsatisfactory picture quality. Vesa modes ho...

  • Page 16

    Touch screen 5 section 14 touch screens are a common means to interface operator inputs to a system. The universal standard of windows gui (graphical user interface) has significantly increased the use of touch screens. There are four main touch technologies. The technologies are resistive, surface ...

  • Page 17

    Vt190 colorvue user guide 150-077 15 problem troubleshooting tip no image on display screen 1) check that the power cord of the computer has been connected securely into wall outlet or grounded extension cable or strip. 2) check that the power switch of the display has been pressed and the led on th...

  • Page 18

    Cleaning occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated grit. Do not use paper products as they may scratch the...

  • Page 19: Panel Mount Procedure

    Vt190 colorvue user guide 150-077 17 mechanical drawings 8 section mechanical drawings model description page(s) vt190pc 19.0” colorvue panel mount mechanical drawing 18-19 vt190rc 19.0” colorvue rack mount mechanical drawing 20 panel mounting procedure 1. Cut and drill the panel (refer to panel mou...

  • Page 20

    Panel size 19.0” type tft active matrix w/ anti-glare coating pixel pitch 0.297mm resolution sxga 1280 x 1024 max active diagonal 19.0” viewable active screen area 14.8” x 11.85” 376mm x 301mm pixel format 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024 viewing angle (up/down) 85/85 deg. Viewing angle...

  • Page 21

    Vt190 colorvue user guide 150-077 150-077-001 8.27.04 vartech systems inc. Headquarters 11529 sun belt ct. Baton rouge, louisiana 70809 toll-free: 800.223.8050 international phone: 001.225.298.0300 fax: 225.297.2440 e-mail: sales@vartechsystems.Com www.Vartechsystems.Com.