VarTech Systems VT201C User Manual

Manual is about: 20.1” Flat Panel Series

Summary of VT201C

  • Page 1

    Vt201 diamondvue user guide 150-021 vt201 diamondvue series 20.1” flat panel series lcd monitors vt201c · vt201r vt201p · vt201pss vt201w · vt201m · vt201mf transflectives: vt201ctsr · vt201ptsr vt201psstsr · vt201rtsr vartech systems inc. Solutions for demanding applications industrial crt and flat...

  • Page 2: Table of Contents

    Table of contents page page section 1 section 4 introduction 1 touch screen 10 1.1 about lcd monitors 1 4.1 introduction 10 1.2 product safety precautions 2 4.2 installation 10 section 2 section 5 display setup 3 troubleshooting tips 11-12 display features 3 2.1 unpacking the display 4 section 6 2.2...

  • Page 3: Introduction

    Vt201 diamondvue user guide 150-021 lcds introduction introduction 1 section about lcd monitors what you gain by using an lcd monitor in your industrial controls are the future of display technology. Crts although they have dropped in cost significantly, do not offer the performance, reliability, an...

  • Page 4: Product Safety Precautions

    Product safety precautions ensure that sufficient space is available around the display to provide the circulation necessary for cooling. Ensure that the ambient air temperature will not exceed the specified maximum temperature. Do not attempt to service this display yourself. The rear chassis has a...

  • Page 5: Display Setup

    Vt201 diamondvue user guide 150-021 section 2 display setup display setup vt201 series display features capable of displaying unlimited colors in a continuous spectrum. The high contrast lcd enhances the image with no geometric distortion. The vt201 diamondvue series directly accepts an analog 5 wir...

  • Page 6: Signal Connections

    Vt201c, vt201p, vt201p-ss, vt201r, vt201mf, vt201w, vt201m lcd monitor or vt201ctsr, vt201ptsr, vt201psstsr, vt201rtsr transflective 5 ft video cable 10-32 mounting hardware. (for use with panel mount only) 6 ft rs232 or usb touch interface cable (optional when touch is installed) cd rom with touch ...

  • Page 7

    Vt201 diamondvue user guide 150-021 2.5 signal connections cont. 5 standard resolution supported 640 x 480 (vga) pin assignments for the hd15 video connector. Pin 1 red video 2 green video 3 blue video 4 not used 5 return 6 red video ground 7 green video ground 8 blue video ground 9 no connection 10...

  • Page 8: Signal Connections Cont.

    Optional bnc adaptor cable a 5bnc-to-hd15 adapter cable is available. The functions of the cables are described below. R, b, and g: red, green, and blue input connectors to establish color. These are used for rs-343 analog signals. Hs/cs: separate horizontal/composite sync signal from the video sour...

  • Page 9: Getting Started

    Vt201 diamondvue user guide 150-021 vartech systems, inc menu select down up input 3 section 3.1 adjusting the display the vt201 diamondvue series display has an embedded microprocessor in the converter card. Once you have the unit displaying the resolution you desire for your application do the fol...

  • Page 14: Touch Screen

    Touch screen touch screen 10 4 section touch screens are a common means to interface operator inputs to a system. The universal standard of windows gui (graphical user interface) has significantly increased the use of touch screens. There are four main touch technologies. The technologies are resist...

  • Page 15: Troubleshooting

    Vt201 diamondvue user guide 150-021 11 trouble troubleshooting tip no picture the signal cable should be properly connected to the display card and computer. Try disconnecting the video cable from the display and connecting to a crt display if available to confirm the presence of proper video. Make ...

  • Page 16: Troubleshooting Cont.

    12 trouble troubleshooting tip screen is blank. Screen saver activated. Video cable problem. Check for proper installation change video cable . Faulty video display. Needs service. Image is dim, even with brightness and contrast controls set full up video cable problem. Check for proper installation...

  • Page 17: Cleaning  And Maintanence

    Vt201 diamondvue user guide 150-021 cleaning and maintanence cleaning and maintanence cleaning occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid ...

  • Page 18: Mounting Instructions

    Panel mounting procedure 1. Cut and drill the panel (refer to panel mount drawing). Measurements are in inches. Panel mounting cutout 2. If access to the side of the monitor is not available following installation, attach the power and video cables to the side of the monitor at this time. 3. Install...

  • Page 19: Specifications

    Vt201 diamondvue user guide 150-021 23 specifications specifications 8 section engineering specifications panel size 20.1” type active matrix color thin film transistor (tft) resolution capabilities vga to uxga pixel pitch .3075 mm active display area 16.21” x 12.20” 411.7mm x 309.8mm pixel format 6...

  • Page 20

    150-021-015 3.15.12 vartech systems headquarters 11529 sun belt ct. Baton rouge, louisiana 70809 toll-free: 800.223.8050 international phone: 001.225.298.0300 fax: 225.297.2440 e-mail: sales@vartechsystems.Com www.Vartechsystems.Com.