Vt213 diamondvue user guide 150-017 vartech systems inc. Solutions for demanding applications industrial crt and flat panel displays user’s guide read these instructions completely before attempting to operate your new color display. Vt213 series 21.3” flat panel series lcd monitors vt213c · vt213p ...
Table of contents page page section 1 section 4 introduction 1 touch screen 10 1.1 about lcd monitors 1 4.1 touch screen introduction 10 1.2 product safety precautions 2 4.2 touch screen definition 10 section 2 section 5 display setup 3 troubleshooting tips 11-12 display features 3 2.1 unpacking the...
Vt213 diamondvue user guide 150-017 lcds introduction introduction 1 section about lcd monitors what you gain by using an lcd monitor in your industrial controls 1.1 1 are the future of display technology. Although crts have dropped in cost significantly, they do not offer the performance, reliabili...
Product safety precautions ⇒ ensure that sufficient space is available around the display to provide the circulation necessary for cooling. ⇒ ensure that the ambient air temperature will not exceed the specified maximum temperature. ⇒ do not attempt to service this display yourself. The rear chassis...
Vt213 diamondvue user guide 150-017 section 2 display setup display setup vt201 series display features ⇒ capable of displaying unlimited colors in a continuous spectrum. The high contrast lcd enhances the image with no geometric distortion. ⇒ the vt213 diamondvue series directly accepts an analog 5...
⇒ vt213c, vt213p, vt213p-ss, vt213r lcd monitor or vt213ctsr, vt213ptsr, vt213psstsr, vt213rtsr transflectives ⇒ 5 ft video cable ⇒ 10-32 mounting hardware. (for use with panel mount only) ⇒ 6 ft rs232 touch interface cable (optional when touch is installed) ⇒ cd rom with touch screen drivers (optio...
Vt213 diamondvue user guide 150-017 2.5 signal connections cont. 5 standard resolution supported ⇒ 640 x 480 (vga) pin assignments for the hd15 video connector. Pin 1 red video 2 green video 3 blue video 4 not used 5 return 6 red video ground 7 green video ground 8 blue video ground 9 no connection ...
Optional bnc adaptor cable a 5bnc-to-hd15 adapter cable is available. The functions of the cables are described below. ⇒ r, b, and g: red, green, and blue input connectors to establish color. These are used for rs-343 analog signals. ⇒ hs/cs: separate horizontal/composite sync signal from the video ...
Vt213 diamondvue user guide 150-017 vartech systems, inc menu select down up input 3 section 3.1 adjusting the display the vt201 diamondvue series display has an embedded microprocessor in the converter card. Once you have the unit displaying the resolution you desire for your application do the fol...
To adjust the brightness and contrast of the screen osd agent description brightness adjusts the brightness of video without affecting pc rgb’s brightness contrast adjusts the contrast of video without affecting pc rgb’s contrast clock removes the noises. When frequency value is wrong, the image has...
Vt213 diamondvue user guide 150-017 selects the applied input among dvi digital, analog rgb, video and s-vhs osd agent description dvi digital selects the dvi digital function. Analog rgb selects the analog rgb function. Video selects the video function. S-vhs selects the s-vhs function. To adjust t...
Touch screen touch screen 10 4 section touch screens are a common means to interface operator inputs to a system. The universal standard of windows gui (graphical user interface) has significantly increased the use of touch screens. There are four main touch technologies. The technologies are resist...
Vt213 diamondvue user guide 150-017 11 trouble troubleshooting tip no picture ⇒ the signal cable should be properly connected to the display card and computer. ⇒ try disconnecting the video cable from the display and connecting to a crt display if available to confirm the presence of proper video. ⇒...
12 trouble troubleshooting tip screen is blank. Screen saver activated. Video cable problem. Check for proper installation change video cable . Faulty video display. Needs service. Image is dim, even with brightness and contrast controls set full up video cable problem. Check for proper installation...
Vt213 diamondvue user guide 150-017 cleaning and maintanence cleaning and maintanence cleaning occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid ...
Panel mounting procedure 1. Cut and drill the panel (refer to panel mount drawing). Measurements are in inches. Panel mounting cutout 2. If access to the side of the monitor is not available following installation, attach the power and video cables to the side of the monitor at this time. 3. Install...
Vt213 diamondvue user guide 150-017 19 specifications specifications 8 section engineering specifications panel size 21.3” type active matrix color thin film transistor (tft) resolution capabilities vga to uxga pixel pitch .27 mm active display area 17.117” x 12.865” 434.8mm x 326.8mm pixel format 6...
150-017-007 8.27.04 vartech systems headquarters 11529 sun belt ct. Baton rouge, louisiana 70809 toll-free: 800.223.8050 international phone: 001.225.298.0300 fax: 225.297.2440 e-mail: sales@vartechsystems.Com www.Vartechsystems.Com.
