Solutions for demanding applications vartech s y s t e m s i n c. 10.4” c1-d2 compliant panel mount pc model vtpc100pss user’s guide read these instructions completely before attempting to operate your new panel mount pc.
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 2 revision history date rev no summary page 10/12/09 00 first issue.
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 3 safety instructions please note - this equipment is suitable for use in class i, division 2 or non-hazardous locations only. Warning - explosion hazard - do not disconnect equipment unless power has been switched off or the area is known to be no...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 4 explosion hazard - substitution of components may impair suitability for hazardous locations. Any equipment or associated cabling connected to this device must be non-incendive and/or suitable for the class 1, division 2 area in which it is to be...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 5 environment and enclosure information: review this information on enclosures before installing the product: attention: environment and enclosure this equipment is intended for use in a pollution class 2 industrial environment, in overvoltage cate...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 6 cleaning the lcd monitor to clean the lcd panel: wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean, lint free cloth. This is to remove dust and other particles without scratching the lcd panel. If it is still not...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 7 computer system: processor intel® atom™ n270, 1.6 ghz processor system memory 200 pin ddr pc-3200 so-dimm 2 gb x 1 bios ami bios hard drive 320 gb sata operating system microsoft xp professional (sp3) for embedded systems expansion slots none bac...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 8 power & operational specifications: power input 100 - 240 vac 1.5a 50/60 hz 12 - 24 vdc 6.0a max (optional); selv source required if used power consumption 37w temperature operational: -32°f to 140°f 0°c to 60°c storage: -4°f to 149°f -20°c to 65...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 9 before making any connections or applying power, first read through the entire manual panel mount procedure panel mounting procedure: 1- cut and drill the panel (refer to the panel mount drawing, figure a). Measurements are provided in inches and...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 10 panel mount drawing: detail –a– connections to the panel mount pc bottom rear view (ac unit shown) - connector panel -.
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 11 please note – any equipment or associated cabling connected to this device must be non-incendive and/or suitable for the class i division 2 area in which it is to be installed. Power connection (power in) ac models - the ac model of the panel mo...
10.4” c1-d2 compliant panel mount pc 486-0029-00-00 12 turning the system on and off before connecting the panel mount pc to power, connect any peripheral devices. As a general rule, any peripheral device should only be connected or disconnected when the panel mount pc is off with the exception of a...
