Solutions for demanding applications vartech s y s t e m s i n c. 21.5” wide format class 1 - division 2 certified vesa mount enclosed pc model vtpc2100vs / vtpc2100vs video monitor.
User’s guide read these instructions completely before attempting to operate your new vesa mount pc revision history date rev no summary page 12/04/17 00 first issue.
Safety instructions please note - this equipment is suitable for use in class i, division 2 or non-hazardous locations only. Warning - explosion hazard - do not disconnect equipment unless power has been switched off or the area is known to be non-hazardous. Avertissement - risqe d'explosion - avant...
any equipment or associated cabling connected to this device must be non-incendive and/or suitable for the class 1, division 2 area in which it is to be installed. Hazardous locations: this equipment is suitable only for the locations specified on the product nameplate, specifically: class i, di...
Environment and enclosure information: review this information on enclosures before installing the product: attention: environment and enclosure this equipment is intended for use in a pollution class 2 industrial environment, in overvoltage category ii applications (as defined in iec publication 60...
Cleaning the lcd monitor to clean the lcd panel: wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean, lint free cloth. This is to remove dust and other particles without scratching the lcd panel. if it is still not clean, then wipe with a damp lint free cloth and ...
Computer system: processor 2.0ghz quad core intel® celeron® processor j1900 system memory 4gb ddr3l-1333 so-dimm x 1 bios ami hard drive 500 gb sata operating system windows 10 - 32 bit i/o ports 2 x lan 3 x rs-232 1 x rs-422/485 2 x usb 2.0 1 x power connector graphics intel® hd graphics lan 2 x 10...
Power & operational specifications: power input 100 - 220 vac 1.5a power consumption 60w temperature operational: -32°f to 122°f 0°c to 50°c storage: -4°f to 140°f -20°c to 60°c humidity operational: 20 to 40°c, 90% rh nc storage: 5 to 65°c, 28% rh nc installation of your vesa mount pc packaged with...
Mounting procedure vesa panel mounting procedure: 1- install the enclosure to a 100mm vesa mount pedestal. 2- secure the enclosure using the screws and lock washers, supplied with the unit. Vesa mount drawing: detail –a–.
Connections to the vesa mount pc bottom rear view -connector panel-.
Please note – any equipment or associated cabling connected to this device must be non-incendive and/or suitable for the class i division 2 area in which it is to be installed.Power connection (power in) power connection (power in) the vesa mount enclosed pc includes an ac line cord which is 3ft lon...
Turning the system on and off before connecting the enclosed vesa mount pc to power, connect any peripheral devices. As a general rule, any peripheral device should only be connected or disconnected when the enclosed pc is off with the exception of any usb peripheral. The enclosed vesa mount pc is t...
