VarTech Systems VTPC500PSS User Manual - page 5
19.0” C1-D2 Compliant Panel Mount PC
486-0032-0-00
5
Environment and Enclosure Information:
Review this information on enclosures before installing the product:
ATTENTION: Environment and Enclosure
This equipment is intended for use in a Pollution Class 2 industrial environment, in
overvoltage Category II applications (as defined in IEC publication 60664-1), at
altitudes up to 2000 meters (6561 feet).
This equipment is supplied as open-type equipment. UL recognized and
hazardous location equipment must be mounted in an enclosure that is suitably
designed or rated for those specific environmental conditions that will be present,
and designed to prevent personal injury resulting from accesibility to live parts.
These units are shipped with a gasketed bezel to meet specified NEMA and IEC
ratings if and only if mounted in a flat panel or enclosure with an equivalent rating.
Peripheral equipment must be suitable for the location in which it is used.
See NEMA Standards publication 250 and IEC publication 60529, as applicable,
for explanations of the degrees of protection provided by different types of
enclosures. The user may also reference the Industrial Automation Wiring and
Grounding Guidelines, publication 1770-4.1, for additional installation
requirements pertaining to this equipment.