1. DL manuals
  2. Varytec
  3. DJ Equipment
  4. 390731
  5. User manual

Varytec 390731 User manual

Manual is about: 7x10W RGBAWUV battery spot light

Summary of 390731

  • Page 1

    Led accu pad 7 7x10w rgbawuv battery spot light user manual.

  • Page 2

    Musikhaus thomann thomann gmbh hans-thomann-straße 1 96138 burgebrach germany telephone: +49 (0) 9546 9223-0 e-mail: info@thomann.De internet: www.Thomann.De 26.07.2017, id: 390731.

  • Page 3: Table of Contents

    Table of contents 1 general notes............................................................................................................................................... 5 1.1 further information.....................................................................................................

  • Page 4

    7.6 functions in 8-channel dmx mode........................................................................................... 39 7.7 functions in 11-channel dmx mode........................................................................................ 40 8 technical specifications...................

  • Page 5: General Notes

    1 general notes this manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sur...

  • Page 6

    1.1 further information on our website ( www.Thomann.De) you will find lots of further information and details on the following points: download this manual is also available as pdf file for you to download. Keyword search use the search function in the electronic version to find the topics of inter...

  • Page 7

    1.2 notational conventions this manual uses the following notational conventions: the letterings for connectors and controls are marked by square brackets and italics. Examples: [volume] control, [mono] button. Texts and values displayed on the device are marked by quotation marks and italics. Examp...

  • Page 8

    Signal word meaning danger! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. Warning! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death ...

  • Page 9

    Warning signs type of danger warning – danger zone. General notes led accu pad 7 7x10w rgbawuv 9.

  • Page 10: Safety Instructions

    2 safety instructions this device is intended to be used as an electronic illumination effect using led technics. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating co...

  • Page 11

    Danger! Danger for children ensure that plastic bags, packaging, etc. Are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.G. Knobs or the like) from the unit. They could swallow the pieces and choke! Ne...

  • Page 12

    Danger! Electric shock caused by short-circuit always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered el...

  • Page 13

    Notice! Risk of fire do not cover the device nor any ventilation slots. Do not place the device near any direct heat source. Keep the device away from naked flames. Notice! Operating conditions this device has been designed for indoor use only. To prevent damage, never expose the device to any liqui...

  • Page 14

    Notice! Power supply before connecting the device, ensure that the input voltage (ac outlet) matches the voltage rating of the device and that the ac outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug ...

  • Page 15

    Notice! Possible damage due to incorrect storage deep discharge can cause batteries to become permanently damaged or lose some of their capacity. Before prolonged rest periods, charge the batteries to around 50 % of their capacity and then switch the equipment off. Store the equipment at a tempera‐ ...

  • Page 16: Features

    3 features the led pad is suitable for almost all applications, for example in clubs, bars, small stages and theatres. It is characterized by small size, solid construction also for use ‘on tour’ and enormous power. Special features of the device: n 7 × 10 w rgbawuv leds n ideal solution for flexibl...

  • Page 17: Installation

    4 installation unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable f...

  • Page 18

    Notice! Risk of overheating always ensure sufficient ventilation. The ambient temperature must always be below 40 °c (104 °f). Notice! Use of stands when mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the max...

  • Page 19

    Notice! Possible data transmission errors for error-free operation make use of dedicated dmx cables and do not use ordi‐ nary microphone cables. Never connect the dmx input or output to audio devices such as mixers or ampli‐ fiers. Installation led accu pad 7 7x10w rgbawuv 19.

  • Page 20: Starting Up

    5 starting up establish all connections as long as the unit is switched off. Use the shortest possible high- quality cables for all connections. Starting up battery spot light 20

  • Page 21

    Connect the dmx input of the device to the dmx output of a dmx controller or another dmx device. Connect the output of the first dmx device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last dmx device in the daisy chain is terminated with a re...

  • Page 22

    When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the dmx output of the master device to the dmx input of the first sl...

  • Page 23: Connections and Controls

    6 connections and controls top side connections and controls led accu pad 7 7x10w rgbawuv 23.

  • Page 24

    1 locking screws for the mounting bracket. 2 lateral air vents. 3 leds. 4 bracket for floor placement or hanging. 5 infrared sensor for receiving signals from the remote control. Connections and controls battery spot light 24.

  • Page 25

    Side view connections and controls led accu pad 7 7x10w rgbawuv 25.

  • Page 26

    6 antenna for wireless dmx control. 7 [signal] indicator for successfully established wireless dmx connection. 8 [battery indicator] charge status indicator for built-in battery. 9 dmx antenna holder. 10 on / off switch. 11 iec chassis plug with fuse holder. To replace the fuse, carefully take out t...

  • Page 27

    13 [menu]: calls up the main menu or a submenu. : button to increase the displayed value by one. : button to decrease the displayed value by one. [enter]: confirms a selected value. 14 display. 15 [dmx out] dmx output. 16 [dmx in] dmx input. Connections and controls led accu pad 7 7x10w rgbawuv 27.

  • Page 28

    Remote control connections and controls battery spot light 28.

  • Page 29

    17 [slave] toggles operating modes ‘master‘ and ‘slave’. 18 [speed] activates the setting mode for the programme speed. Adjust the speed using the buttons [up] and [down] . 19 [up / down] to select a desired program or increase / decrease a parameter value. 20 [0 … 9] to make numeric settings. 21 [p...

  • Page 30

    24 [auto 1 & 2] activates the ‘preprogrammed automatic show’ 1 or 2. 25 [power] activates or deactivates the device. 26 [dmx] press once to set the dmx address. After pressing twice, the dmx mode can be set. Connections and controls battery spot light 30

  • Page 31: Operating

    7 operating 7.1 starting the device connect the device to the power grid. The built-in battery is now charging. If no segment of the charge status indicator is lit, the battery is exhausted and must be charged. If all 5 seg‐ ments are lit, charging is complete. The device can be used during charging...

  • Page 32

    Press [menu]. Press or repeatedly until the display shows ‘addr’ . Press [enter]. Now you can set the number of the first dmx channel to be used by the device (dmx address). Use or to select a value between 1 and 512 (display shows ‘a001’ … ‘a512’ ). When the display shows the desired value press [e...

  • Page 33

    Press [menu]. Press or repeatedly until the display shows ‘chnd’ . Press [enter]. Now use or to select one of the following dmx operating modes: n ‘1ch’ (one channel) n ‘2ch’ (two channels) n ‘8ch’ (eight channels) n ‘11ch’ (eleven channels) this setting is only relevant when the device is controlle...

  • Page 34

    Press [menu]. Press or repeatedly until the display shows ‘slav’ . Press [enter]. ‘sla’ is flashing in the display. The device is now configured as slave and follows the settings of the master device to which it is connected. Press [menu] to return to the parent menu. This setting is only relevant i...

  • Page 35

    Press [menu]. Press or repeatedly until the display shows ‘rset’ . Press [enter] to reset the device to its factory default settings. This will erase all user settings. To return to the parent menu, press [menu]. Press [menu]. Press or repeatedly until the display shows ‘colo’ . Press [enter]. Now u...

  • Page 36

    Press [menu]. Press or repeatedly until the display shows ‘reno’ . Press [enter]. Use or to now either enable (display shows ‘on’ ) or disable (display shows ‘off’ ) the remote control function. When the display shows the desired value press [enter] to confirm the selection and then [menu] to return...

  • Page 37

    7.3 menu overview operating led accu pad 7 7x10w rgbawuv 37.

  • Page 38

    7.4 function in 1-channel dmx mode channel value function 1 0…255 36 different colour macros 7.5 functions in 2-channel dmx mode channel value function 1 0…255 intensity (0 % to 100 %) 2 0…255 36 different colour macros operating battery spot light 38.

  • Page 39

    7.6 functions in 8-channel dmx mode channel value function 1 0…255 intensity (0 % to 100 %) 2 0…255 intensity red (0 % to 100 %) 3 0…255 intensity green (0 % to 100 %) 4 0…255 intensity blue (0 % to 100 %) 5 0…255 intensity white (0 % to 100 %) 6 0…255 intensity amber (0 % to 100 %) 7 0…255 intensit...

  • Page 40

    7.7 functions in 11-channel dmx mode channel value function 1 0…255 intensity (0 % to 100 %) 2 0…255 intensity red (0 % to 100 %) 3 0…255 intensity green (0 % to 100 %) 4 0…255 intensity blue (0 % to 100 %) 5 0…255 intensity white (0 % to 100 %) 6 0…255 intensity amber (0 % to 100 %) 7 0…255 intensi...

  • Page 41

    Channel value function 21…30 ramp-down 31…40 ramp-up/ramp-down 41…50 colour-change fade (5 colours) 51…60 colour-change flash (6 colours) 61…70 colour-change flash (27 colours) 71…80 colour-change flash (24 colours) 81…90 colour-change fade (6 colours) 91…100 colour-change fade (red-green; white-ult...

  • Page 42

    Channel value function 11 0…127 sound-controlled colour change (static) 128…255 sound-controlled colour change (flash) operating battery spot light 42.

  • Page 43: Technical Specifications

    8 technical specifications leds 7 × 6in1 leds (rgbwauv), each 10 w beam angle 23° number of dmx channels 1, 2, 8, 11 power consumption 70 w operating supply voltage 100 – 240 v 50/60 hz fuse 5 mm × 20 mm, 3.15 a, 250 v, fast acting battery lithium-ion, 11,1 v, 10400 mah protection class ip20 housing...

  • Page 44

    9 plug and connection assignments this chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘sound & light’ caution is indicated: even if a plug fits into a socket, t...

  • Page 45: Troubleshooting

    10 troubleshooting notice! Possible data transmission errors for error-free operation make use of dedicated dmx cables and do not use ordi‐ nary microphone cables. Never connect the dmx input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems th...

  • Page 46

    Symptom remedy the unit does not work, no light check the mains connection. If the device is operated independently from the mains power supply, check the charge status of the built-in battery. Apparently no function despite proper power supply check if the unit is in dmx mode or in ‘slave’ mode. If...

  • Page 47

    Symptom remedy 4. If the device is to be controlled wirelessly via dmx, check whether the module is activated in the menu. If so, find a better dmx antenna orientation. 5. Check whether the dmx cables run near or parallel to high-voltage cables that may cause damage or interfer‐ ence to a dmx interf...

  • Page 48: Cleaning

    11 cleaning clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. ...

  • Page 49: Protecting The Environment

    12 protecting the environment for the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. Are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure th...

  • Page 50

    This product is subject to the european waste electrical and electronic equipment directive (weee) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the...

  • Page 52

    Musikhaus thomann · hans-thomann-straße 1 · 96138 burgebrach · germany · www.Thomann.De.